OCELOT: Odometry and Contact Estimation for Legged Robots
Authors: Emre Girgin, Cagri Kilic
Organizations: Department of Aerospace Engineering, Embry-Riddle Aeronautical University, Daytona Beach, FL 32114, USA.
Abstract
One of the significant challenges in legged robotics is achieving accurate odometry using only onboard proprioceptive sensors. In this study, we present a complete leg odometry pipeline based on an Error-State EKF (ESEKF) that relies exclusively on proprioceptive data: a body fixed IMU, joint encoders, and force sensors, where filter's state is corrected by feet determined to be in a stationary stance. The core of our contribution is fused contact detection and an uncertainty quantification module designed to explicitly identify and reject slippage. This module runs two detectors in parallel for each foot, 1) a debounced, force-based Gaussian Mixture Model (GMM) guided Finite State Machine (FSM) to confirm physical contact, and 2) a kinematic-based Generalized Likelihood Ratio Test (GLRT) on the estimated velocity of the foot. The continuous quality scores from both estimators are fused to detect if the foot is both physically loaded and kinematically stationary and served as an uncertainty signal for each contact. To validate our approach, we collected a multi-modal dataset of 29 sequences spanning diverse indoor and outdoor terrains (e.g., concrete, grass, pebble, and rock) total of 2.4 km long. We benchmarked our approach against both proprioceptive and exteroceptive methods. The results demonstrate our method's efficacy in providing accurate odometry estimates, robustly handling slippage-prone environments. We also share our code and real-time ROS2 package as open-source.
In this paper, we present TRACE (Tokenized Robust Attention for Contact-Aware Estimation), an end-to-end learned proprioceptive odometry estimator for legged robots under unreliable contact conditions. The proposed estimator directly predicts relative displacement, relative rotation, and body-frame velocity from a recent history of onboard inertial and joint measurements. To improve robustness under unreliable contact conditions, we introduce a foot-aware cross-attention module that adaptively weights IMU and leg-wise kinematic tokens without relying on manually defined contact or slip thresholds. The estimator is trained with direct supervision and two physics-inspired auxiliary losses that promote kinematic consistency and reliable use of leg information. To reduce policy-specific overfitting and consequently improve sim-to-real transfer, simulation training incorporates policy randomization, followed by partial real-world fine-tuning of the temporal encoder and prediction head. Experiments across diverse indoor and outdoor terrains demonstrate consistent reductions in position drift compared with classical filtering-based, hybrid, and purely learning-based baselines. Ablation studies further validate the contributions of the proposed training objectives, policy randomization, and real-world fine-tuning, particularly under unreliable contacts and sim-to-real mismatch.
Reliable odometry for legged robots without cameras or LiDAR remains challenging due to IMU drift and noisy joint velocity sensing. This paper presents a purely proprioceptive state estimator that uses only IMU and motor measurements to estimate body pose and velocity, with a unified formulation applicable to quadruped and wheel-legged robots and extensible to other legged morphologies. The key idea is to treat each reliable contact as a kinematic anchor: joint-torque--based foot wrench estimation selects stance contacts, and the corresponding footfall records provide intermittent world-frame constraints that suppress long-term drift. To prevent elevation drift during extended traversal, we introduce a lightweight height clustering and time-decay correction that snaps newly recorded footfall heights to previously observed support planes. For wheel-legged platforms, the recorded contact is further propagated by effective wheel rolling displacement with shank-motion compensation and a slope-aware rolling direction. To improve foot velocity observations under encoder quantization, we retain an inverse-kinematics cubature Kalman filter as an optional velocity-enhancement module that filters foot-end velocities from joint angles and velocities. The implementation further mitigates yaw drift through multi-contact geometric consistency, which is injected as a soft heading prior rather than as a hard reset of the attitude state. The method is evaluated on four quadruped platforms.
Robust and accurate proprioceptive state estimation of the main body is crucial for legged robots to execute tasks in extreme environments where exteroceptive sensors, such as LiDARs and cameras, may become unreliable. In this paper, we propose DogLegs, a state estimation system for legged robots that fuses the measurements from a body-mounted inertial measurement unit (Body-IMU), joint encoders, and multiple leg-mounted IMUs (Leg-IMU) using an extended Kalman filter (EKF). The filter system contains the error states of all IMU frames. The Leg-IMUs are used to detect foot contact, thereby providing zero-velocity measurements to update the state of the Leg-IMU frames. Additionally, we compute the relative position constraints between the Body-IMU and Leg-IMUs by the leg kinematics and use them to update the main body state and reduce the error drift of the individual IMU frames. Field experimental results have shown that our proposed DogLegs system achieves better state estimation accuracy compared to the traditional leg odometry method (using only Body-IMU and joint encoders) across various terrains. We make our code and datasets publicly available to benefit the research community (https://github.com/YibinWu/DogLegs).