Advanced driver assistance systems (ADAS) play an important role in modern automotive intelligence, significantly enhancing vehicle safety and stability. The performance of ADAS critically relies on accurate and reliable vehicle state estimation, particularly from vehicle dynamic sensors. Among these signals, wheel load is a key variable for chassis control and safety-critical functions, yet it remains difficult to estimate robustly due to complex suspension geometry, nonlinear dynamics, and measurement noise. To address this issue, we propose DBPnet, a Bayesian physics-informed neural network (PINN) with a physics-aware embedding module inspired by damper characteristics. First, this paper presents a suspension linkage-level modeling (SLLM) approach that constructs a nonlinear instantaneous dynamic model by explicitly considering the complex geometric structure of the suspension. Building upon SLLM, Bayesian inference is integrated into the PINN to effectively cope with noise and uncertainty in the vehicle chassis system, thereby improving the model's robustness. Then, a physics-informed loss function is employed to ensure consistency with fundamental physical principles, while the damper characteristics-inspired embedding module extracts temporal variation features of input signals and incorporates them into each layer of the PINN, ensuring that physical observations guide the neural network without being constrained by fixed physical models. Extensive evaluations on high-fidelity simulations and real-world experiments demonstrate that our DBPnet consistently achieves lower RMSE and MaxError than baseline methods. These results highlight the potential of our DBPnet to advance wheel load estimation and contribute to the development of more reliable ADAS actuator functions.
Accurate modeling of nonlinear vehicle dynamics is essential for high-speed autonomous racing, where controllers operate at the handling limits. Model-based methods are interpretable but rely on simplifying assumptions, while purely learned models capture nonlinearities yet often lack physical consistency, generalization, and adaptability to changing operating conditions. This paper presents DynSSM, a physics-aware state-space memory framework that combines learned temporal representations with a structured vehicle dynamics model. The proposed approach integrates state-space sequence modeling and recurrent encoders to capture long- and short-term dynamic behavior. It simultaneously adapts tire and vehicle-dynamics parameters within bounded ranges to preserve physical plausibility. A residual correction mechanism compensates for remaining unmodeled dynamics while preserving the underlying physics-based structure. DynSSM is evaluated on both simulated small-scale racing data and real-world full-scale autonomous Indy racecar data. When evaluated on an unseen real-world track, DynSSM reduces one-step prediction RMSE by up to 27.2% in longitudinal velocity, 73.9% in lateral velocity, and 88.8% in yaw rate compared with the state-of-the-art (\sota{}) baselines. Component-wise ablation studies demonstrate the importance of temporal memory, parameter adaptation, and residual correction for predictive performance and robustness. Further, closed-loop simulations using nonlinear model predictive control demonstrate that DynSSM remains feasible across the evaluated tracks and achieves up to a 13.2% reduction in one-lap completion time compared with \sota{} baselines. These results indicate that combining temporal memory, bounded physics-guided parameter adaptation, and residual correction provides an accurate, interpretable, and control-ready dynamics model for autonomous racing.
Musabbir Ahmed Arrafi, Malik Ali, Nicholas M. Stiffler +1
Traffic state estimation from sparse fixed sensors is challenging because physics-informed neural networks (PINNs) tend to over-smooth sharp transitions admitted by the Lighthill-Whitham--Richards (LWR) model. This study proposes Two-Stage Domain Decomposition Physics-Informed Neural Networks (TSDD-PINN), an observation-aligned framework for LWR-based offline speed-field reconstruction. The framework supports spatial, temporal, and space--time refinement. Matched direction analysis shows that spatial refinement has the lowest mean error and less than half the training time of space--time refinement in the tested setting, while temporal refinement is faster. A global parent PINN is first trained. In the controlled spatial implementation, its residual profile guides a deterministic partition for warm-started child networks. An optional operational safeguard retains Stage~1 when the prespecified screen does not activate. The primary I-24 MOTION evaluation spans five days, five sensor configurations, and ten seeds per configuration, yielding 1{,}500 runs. Controlled TSDD-PINN attains the lowest relative L2 error in 18 of 25 configurations and 14 of 15 sparse-sensing cases, while training 2.4 times faster than the extended PINN (XPINN) baseline under the evaluated implementations and training budgets. Non-neural comparisons show that the advantage over interpolation is concentrated under sparse sensing, whereas dense sensing often favors interpolation. A separate 250-run operational evaluation finds infrequent activation and motivates the Stage-1-preserving safeguard. The residual is treated as an indicator of model difficulty rather than a validated shock detector. The evidence supports a sensing-density-dependent operating range rather than uniform improvement.
Accurate dynamics modeling of Brushless DC (BLDC) motors is fundamental to high-performance robotic joint control. This paper presents a Physics-Informed Neural Network (PINN) with a deep residual (ResNet) backbone that learns a continuous-time surrogate of the full six-state BLDC motor dynamics. Given simulation time, applied three-phase voltages, and excitation parameters as inputs, the network directly predicts all motor state variables -- rotor angle, angular velocity, three-phase currents, and winding temperature -- while simultaneously satisfying the governing electromechanical and thermal ODEs through a composite physics-data loss. A curriculum scheduling strategy gradually activates the physics penalty to prevent premature convergence. Training runs are completed in under two minutes on a standard CPU. Crucially, once trained, PINN inference achieves latencies of 0.1--22, mu s per query, up to 118x faster than conventional ODE solvers, making it suitable for real-time observer and control applications.