Learning from demonstrations is effective for robotic manipulation, but collecting sufficient task-specific data remains a major bottleneck. Under distribution shift, small errors compound, performance degrades, and expert time is often spent on redundant, low-value corrections instead of the few critical failure cases. We present VR-DAgger, a human-in-the-loop framework centered on an immersive VR application for dexterous teleoperation, demonstration collection, and selective policy correction. The VR client provides intuitive hand control with synchronized scene visualization, while a backend workstation runs simulation and learning, enabling autonomous rollouts without continuous operator oversight. We use Monte Carlo (MC) dropout to score uncertainty during Isaac Lab rollouts of a diffusion policy and select informative failure segments for correction. These segments are replayed in VR as clips, where the operator selectively labels and corrects the policy's behavior, concentrating supervision where uncertainty is highest without full-rollout monitoring or a separate intervention classifier. We evaluate on three dexterous manipulation tasks (Pan pick-and-place, Drawer opening, Valve turning) with a 10-DoF XHand under standard and challenging initial configurations. Active labeling consistently improves over behavioral cloning across all tasks, with gains of up to 23 percentage points. Compared to unguided human-in-the-loop inspection, VR-DAgger reduces per-sample collection time by approximately 40% by focusing review on selected segments rather than full rollouts.
Dexterous manipulation presents substantial challenges for imitation learning due to its high-dimensional action space and complex contact-rich dynamics. Policies trained purely from demonstrations often suffer from compounding errors during deployment and require large amounts of expert data to achieve reliable performance. To move beyond the limitations of demonstration data, in this work, we propose DexPIE, a post-training framework for dexterous policy improvement from experience collected through real-world deployment. First, DexPIE enables effective exploration coverage through a dexterous-hand-adapted intervention system and multi-stage DAgger-style data collection across initial and intermediate task stages, providing reliable supervision for accurate policy evaluation. To reduce temporal noise between post-training rollouts and demonstration data, we introduce asynchronous inference in the relative action space, which better aligns rollout data with demonstrated behavior and allows the critic to learn a value function induced by a more consistent underlying policy. Finally, DexPIE improves the policy through conditioning on a continuous optimality indicator, allowing the policy to leverage the quality of data in a more fine-grained manner. Across three challenging real-world dexterous manipulation tasks, DexPIE achieves a 37% improvement in success rate over the demonstration-based reference policy, outperforming all baseline methods and demonstrating stronger robustness. The source code and dataset will be made publicly available.
Imitation-learned vision--language--action (VLA) foundation models acquire broad manipulation capabilities by scaling robot data across tasks and embodiments, but reliable deployment on a specific downstream task and hardware platform still requires post-training. Dexterous hands make this adaptation particularly difficult: their broad behavioural repertoire and high degree of freedom create a large and structured action space. Three obstacles are central: open-source VLAs do not natively provide an action interface for high-DoF hands; gesture mismatch during human-gated DAgger takeover creates command discontinuities and contaminates corrective trajectories; and reinforcement learning in the raw joint space is sample-inefficient. We present a unified four-step post-training pipeline comprising a learned temporal hand-action codec, supervised fine-tuning, DAgger, and real-world residual reinforcement learning. The codec adapts a pretrained VLA to absolute dexterous-hand commands. Buffered rollback, pose alignment, and smooth command blending enable continuous, task-relevant DAgger corrections, while latent residual RL confines exploration to coordinated hand motions captured by the codec. We evaluate the pipeline on five diverse real-world tasks spanning bimanual transfer, in-hand reorientation, and tool use. Within the reported post-training budgets, the resulting policies achieve 100% success on every evaluated task over 20 trials per task. These results provide a practical path for adapting VLA foundation models to reliable real-world dexterous manipulation.
Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.