Chandrayaan-3 mission achieved a historic milestone with its successful soft landing near the lunar south pole, highlighting the critical role of the navigation, guidance, and control (NGC) system. Navigation provided vehicle state estimates relative to the Moon center, while a polynomial based guidance scheme computed the required acceleration profile to meet terminal landing conditions. This acceleration demand was translated into total thrust magnitude and attitude commands generation. Attitude command generation involved aligning the thrust axis with the required acceleration vector and constraining rotation about the thrust axis, typically governed by mission-specific requirements. Although quaternion-based control laws are preferred for their singularity-free representation, they inherently couple all three rotational axes. This coupling can lead to undesirable interactions between guidance and control, especially during large rotations about the thrust axis, due to the quaternion shortest-path property. This paper proposes a novel quaternion-based decoupling method that enables independent thrust-axis control, mitigating guidance-control interaction and ensuring proper attitude commands generation for lander attitude control.
Spacecraft attitude control is traditionally achieved using momentum exchange devices or propellant-consuming thrusters. Meanwhile, a growing number of missions require robotic manipulators, which are typically treated as disturbance sources to be rejected rather than as actuators for spacecraft reorientation. This work investigates the use of manipulator motions for propellant-free attitude control by formulating a trajectory optimization problem with critical joint and collision avoidance constraints. Using an interior point solver for the resulting nonlinear program, complex slew and detumble trajectories are demonstrated for a range of spacecraft-manipulator systems with varying kinematic complexity and mass properties. The achievable control authority is compared directly with that of reaction wheel arrays via momentum and torque envelopes, demonstrating the potential for manipulators to serve as redundant or even primary attitude control systems. This work provides a framework for using manipulators as multipurpose attitude control actuators, with particularly promising applications in in-space assembly and manufacturing when grasping payloads with high relative mass fractions.
This paper presents QuadRocket, a quadrotor-based rocket prototype that provides a low-cost, low-risk platform for validating advanced thrust-vector control strategies for launch vehicle-type systems. The prototype consists of a cylindrical main body mounted on top of a quadrotor through a universal joint, forming a flying inverted pendulum with non-negligible inertia. For control design, the coupled system is modeled as a single axisymmetric rigid body actuated by a vectored force applied along its longitudinal axis. A reduced-attitude representation on the two sphere is adopted to explicitly exploit the vehicle's axial symmetry and to decouple yaw from the thrust-vector direction. On this model, we derive an adaptive backstepping controller that achieves almost global trajectory tracking in the presence of unknown constant disturbances, while a control-point transformation mitigates non minimum-phase behavior. The quadrotor is then treated as a thrust vector actuator, and a dynamic-surface-based attitude controller is designed to track the desired thrust-vector, accounting for actuation dynamics and avoiding explicit differentiation of virtual control signals. The complete architecture is evaluated in simulation and validated experimentally in an indoor motion-capture arena. Results demonstrate accurate trajectory tracking, effective disturbance compensation, and confirm the suitability of the QuadRocket as a versatile testbed for thrust-vector-controlled robotic vehicles.
This paper presents the real-time retargeting guidance policy developed for the Chandrayaan-3 lunar landing mission. The baseline guidance generates approximate fuel-optimal descent trajectories, while a high-level policy enables safe retargeting to alternate sites when the nominal site becomes infeasible. The retargeting strategy leverages a convex representation of the controllability boundary, allowing rapid feasibility checks and real-time target updates. To the best of the authors knowledge, this represents the first application of a data-driven retargeting framework in an operational lunar landing mission. Pre-flight simulations and Chandrayaan-3 flight results validate the effectiveness of the proposed approach.