QuadRocket: An Aerial Robotic Testbed for Adaptive Thrust-Vector Control of Rocket-Like Vehicles

Bidirectional thrust grants quadrotors a second equilibrium condition and increased control authority, expanding the envelope of possible aggressive maneuvers and enabling inverted flight, perching, and sensing. Prior geometric control approaches extend differential flatness through Hopf fibration-based attitude representations to support bidirectional thrust, but struggle with actuator saturation and motor reversal delay during inversions, requiring heuristic thrust posture scheduling and waypoint tuning. We propose a learning-based framework that modulates a constant reference trajectory to perform compact, position-constrained quadrotor inversions while remaining compatible with traditional trajectory generation and tracking across flight regimes. Separate policies are trained via reinforcement learning for nominal-to-inverted and inverted-to-nominal transitions. In JAX-based simulation, the proposed method achieves the lowest position deviation and settling time across all evaluated baselines, reducing position root mean square error (RMSE) by 32% and settling time by 57% relative to the strongest optimization-based baseline. Hardware experiments demonstrate successful inversion across multiple yaw configurations with position RMSE below 0.35m, and compatibility with downstream trajectory generation and control through circular flight in both regimes. Additionally, we provide an open-source implementation of the proposed framework.

Deep Reinforcement Learning (DRL) for quadrotor flight control typically relies on Domain Randomization (DR) for sim-to-real transfer, resulting in overly conservative policies that struggle with dynamic disturbances. To overcome this, we propose a novel adaptive control architecture that actively perceives and reacts to instantaneous perturbations. First, we train an optimal outer-loop policy, then replace its reliance on ground-truth disturbance data with a Residual Dynamics Predictor (RDP). The RDP estimates the external forces and moments acting on the aircraft in flight online using only the history of states and control actions. For seamless hardware transfer, we introduce a data-efficient linear calibration bridge and an online thrust correction mechanism that align the simulated latent space with reality using mere seconds of flight data. Real-world validations on a Crazyflie micro-quadrotor demonstrate that our adaptive controller significantly outperforms baselines, maintaining precise trajectory tracking under severe uncertainties including mass variations, asymmetric payloads, and dynamic slung loads

Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand with extreme maneuverability, manipulation, and resiliency (MMR): maneuverability to fly in arbitrary orientations to reach remote and tight locations; manipulation to point sensors, turn valves, and press tools at arbitrary orientations; resiliency to maintain accurate motion and force control despite disturbances from arbitrary directions, such as wind, ground effects, and friction. Realizing MMR on aerial vehicles requires not only omnidirectional flight; it also requires (I) vectoring of maximum thrust in any direction, to maximize capacity for contact-force application and disturbance rejection, (II) global stability, to enable control over any orientation/position, and (III) compact, standard designs that build upon platforms such as quadrotors to inherit technological know-how. No current aerial vehicle simultaneously enables I--III, due to structural and control limitations that constrain actuation. We present MorphQuad: a morphable quadrotor that enjoys MMR. Key to our approach is a hardware and control co-design: on hardware, we independently articulate each of the four rotor systems via two-axis gimbals; on control, we introduce globally-stable control, and energy-optimal thrust allocation that permits inter-rotor thrust cancellations only to avoid downwash interference and gimbal lock. With fully-onboard autonomy, MorphQuad demonstrates multi-revolution rotation while translating or hovering, for pipe inspection and target tracking (maneuverability); valve turning, perching, and object pressing and pushing with human-level strengths (manipulation); and wind rejection from any direction, even directed to a single rotor, and push-pull recovery (resiliency).