Two Degree-of-Freedom Vibratory Transport in a Grasp

Parallel-jaw grippers are the default manipulator choice in robotics because they are simple, robust, and inexpensive. Their limited in-hand mobility, however, often forces large arm motions and restricts dexterous manipulation in confined workspaces. We present a parallel-gripper upgrade: a double-soft-belt-based finger module that preserves standard opening/closing while adding three in-hand degrees of freedom (DoF): translation, pitch, and roll. The mechanism is deliberately kept simple and engineered for inexpensive manufacturing and straightforward integration, preserving the reliability and precise control of traditional parallel grippers while greatly broadening the range of manipulation capabilities. To demonstrate the utility of the added DoFs, we integrate the gripper in two control pipelines. First, we adapt a model predictive controller for in-hand manipulation of known objects. Second, we introduce a lightweight teleoperation interface that enables simultaneous control of the robot arm and gripper (10 DoFs total) with minimal hardware. Across a suite of challenging manipulation tasks executed via teleoperation, MPC, and trained policies, the proposed gripper consistently improves dexterity and task feasibility compared to a conventional parallel gripper

Astrobee's existing one-degree-of-freedom (DOF) underactuated compliant claw gripper enables perching on the International Space Station (ISS), but provides limited capability for continuous dexterous manipulation. More complex microgravity tasks require an end-effector that can maintain stable contact while limiting disturbance to the free-flying base, since contact forces directly couple into base motion. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, 6-DOF gripper, with the Astrobee free-flying robot for microgravity manipulation. The system is evaluated in MuJoCo using Astrobee's standard handrail perching sequence, including approach, perching, and subsequent pan and tilt motions. Compared with Astrobee's existing gripper, DexCoHand preserves the commanded pan and tilt motions while reducing unintended cross-axis base motion. Hardware experiments on Earth further demonstrate DexCoHand's dexterous manipulation capabilities and its potential for more adaptable intelligent manipulation tasks.

Locomotion in microgravity often relies on sparsely and irregularly arranged anchors, motivating grasp-based mobility with multiple limbs. In this setting, dynamic locomotion is feasible only through deliberate regulation of both anchored interactions and whole-body coordination under coupled dynamic and kinematic constraints. This paper presents design insights for grasp-based dynamic locomotion with multi-limbed robotic systems in microgravity, targeting scenarios that require 6D limb manipulation to establish contacts with candidate anchors. The investigated design parameters include gait pattern, stride length, locomotion speed, and nominal posture. A parameterizable locomotion planning framework is proposed to support variations of these parameters and to evaluate the resulting locomotion performance in terms of stability and actuation demand. Two representative quadruped morphologies are adopted for evaluation in physics-based simulation. The results demonstrate that enlarging the feasible contact wrench space and attenuating impulsive whole-body dynamics improve locomotion performance. These findings inform strategies for contact configuration selection and whole-body coordination in microgravity locomotion with multi-limbed systems.