EaDex: A Cross-Embodiment Dexterous Manipulation Framework from Low-Cost Demonstrations
Authors: Qian Zhao, Xin Tong, Chengdong Wu, Yang Yang, Yingtian Li
Organizations: Faculty of Robot Science and Engineering, Northeastern University · Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences · School of Automation, Nanjing University of Information Science and Technology
Abstract
Dexterous manipulation learning has long been hindered by the high costs of data and training, as pure reinforcement learning typically requires large-scale interactive exploration and imitation learning depends on high-quality demonstrations that are expensive to collect. To address this problem, we propose EaDex, a multi-embodiment dexterous manipulation learning framework under low-cost demonstration conditions, which enables rapid generation of demonstration data and consequently reduces training time for efficient dexterous manipulation. At the data level, EaDex captures human hand motions using only a single RGB-D camera and constructs structured demonstration data through MANO-based hand modeling, data normalization, and motion retargeting. At the learning level, we introduce a contact-reward-based dynamic demonstration annealing mechanism, which guides early-stage exploration under demonstration and gradually transitions to autonomous optimization with accumulating contact rewards. Using our custom dataset, we evaluate EaDex on three dexterous hands and three articulated object-opening tasks, covering nine cross-embodiment manipulation settings, achieving a 55.3% relative improvement over the baseline without demonstration annealing. These results validate the effectiveness of the proposed low-cost demonstration pipeline and the dynamic demonstration annealing strategy for dexterous manipulation learning.
Egocentric RGB-D videos offer a natural source of human dexterous manipulation demonstrations, but existing data is difficult to use for robot learning because object pose, geometry, and contact information are often missing or require pre-scanned object assets. We present EgoAERO, the first framework that learns dexterous manipulation from a single egocentric RGB-D human demonstration without object assets. EgoAERO reconstructs contact-consistent hand-object trajectories through asset-free object tracking and reconstruction, ego motion compensation, and adaptive contact optimization, then converts them into robot policies using two-stage residual learning. We further introduce an online quality assessment mechanism and construct EgoDex-R, a large-scale egocentric dataset with 4.3M RGB-D frames for dexterous policy learning. Simulation and real-world experiments show that EgoAERO enables single-demonstration dexterous manipulation and achieves downstream performance close to CAD-based reconstructions on HOI4D.
Scalable collection of dexterous manipulation demonstrations remains a major bottleneck for robot learning. High-fidelity interfaces often require costly hardware and extensive setup, while low-setup, low cost alternatives tend to provide less precise control and impose greater cognitive workload on operators. We present DexDirect, a direct kinesthetic arm guidance for efficient dexterous demonstration collection. The operator drags a 6-DoF gravity-compensated robot arm directly by a handle, while a single webcam retargets operator's other hand onto a 16 joints 13-DoF dexterous robot hand. User studies suggest DexDirect collects 17.2x and 3.2x more successful demonstrations compared to purely vision (AnyTeleop) and pose-tracking (TeleDex) baselines. An adapted NASA-TLX shows DexDirect greatly reduces mental demand, effort, and frustration, despite raising physical demand. A diffusion policy trained on DexDirect demonstrations reaches a 90% success rate on a cube pick-and-place task. These results suggest that direct kinesthetic arm guidance combined with vision-based hand retargeting provides an efficient low-setup and scalable interface for collecting dexterous manipulation demonstrations
Dexterous object rotation is a sequential contact problem: each support, release, and re-contact decision must both produce the desired object motion, and prepare the hand configuration for continued rotation. Existing reinforcement learning methods discover such movement patterns through trial and error on specific robotic hand embodiments, without explicitly accounting for how each contact transition affects the hand's ability to sustain object rotation in subsequent steps. We introduce DexMani, a framework that transfers human demonstrations as contact-conditioned manipulability evolution. This prior captures how successful human contact transitions reshape the object-rotation directions available to the hand. DexMani then learns this manipulability evolution and uses it to guide downstream reinforcement learning, enabling rotation skills to be acquired across robot embodiments with distinct kinematics and active-contact configurations. Across the Shadow Hand, Allegro Hand, and XHand, DexMani achieves the highest success rates in every evaluated setting for both seen and unseen objects. DexMani reaches an average success rate of 57.5% on LEAP Hand, outperforming other baselines and producing smoother rotatory motions. Project site: https://dexmani.github.io