Development of a 3 in Sewer Pipe Inspection Robot with an Articulated Differential Mechanism using X-shaped Linkages

Tracked robots are widely used in unstructured environments; however, their obstacle traversal capability is fundamentally limited by a tradeoff between front-end reachability and locomotion stability. This study presents TRASER (Tracked Robot with Articulated Spine for Extended Reach), a reconfigurable tracked robot capable of relocating both its articulation point and internal mass. TRASER employs a tape-spring mechanism that localizes compliance to the bending region while maintaining high stiffness in the remaining body, thereby improving both front-end reachability and center-of-mass (CoM) shifting capability. Geometric and static models are developed to analyze the effects of articulation point and CoM position on step and ditch traversal performances. Experiments demonstrate step traversal, suspended-platform traversal, and ditch traversal of 74%, 66%, and 59% of the robot body length, respectively. To the best of our knowledge, these results represent the highest reported obstacle traversal capabilities among tracked mobile robots.

We study the symmetric bouncing of a point robot within orthogonally-joined rectangles with equal width, which we refer to as pipes. We provide an exhaustive case analysis of every trajectory pattern inside a single rectangular pipe segment, identifying the conditions under which the robot exits. We then extend the analysis to L-shaped pipes and, more generally, to linear chains of $k$ orthogonally connected pipe segments. We prove exit guarantees for the special angle $α= π/4$. Furthermore, these results extend to pipes with curved joints.

Wheeled-legged robots, which have wheels at their feet and achieve high mobility by coordinating wheel drive and leg drive, have been developed. These robots have been developed purely as platforms specialized for locomotion. Therefore, they do not have a means to repurpose their legs for roles other than locomotion, such as object manipulation or tool utilization. In this paper, we address the problem of how to draw out the potential task-execution capability of the legs by freeing them from the roles of locomotion through external body support. To this end, we propose and develop a new robot, WiXus, which fuses a wheeled-legged mechanism with a wire-driven mechanism that utilizes the external environment. The developed WiXus demonstrates not only planar locomotion with wheeled-legged drive, but also three-dimensional mobility such as cliff climbing by coordinating wire-driven and wheeled-legged actuation. Furthermore, by suspending the body with wire-driven actuation, WiXus successfully repurpose its legs as arms to perform object manipulation, (e.g., rescuing a dog (stuffed animal)), and tool utilization (e.g., harvesting an apple (mockup) with loppers). This study demonstrates that the approach of utilizing the environment with wire-driven actuation is a new design principle that extends the operational domain of wheeled-legged robots.