The N2D Haptic Glove: A Multi-Finger Glove for 2D Directional Force Feedback for Contact Rich Manipulation
Authors: Yao-Ting Huang, Jake Honma, Omar Hernandez, Logan Li, Kaitlin Calimbahin, Bryce Hackel, Michael C. Yip
Abstract
Humans rely on directional fingertip forces to probe and regulate contact during manipulation, yet most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous. Without directional cues, users must infer contact force from vision alone, often leading to over-pressing, inconsistent control, and reduced precision in robotic teleoperation. We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback. Through benchtop validations and a user study involving haptic teleoperation of a robotic arm and hand, we demonstrate that compared to visual-only and single-axis haptic baselines, planar fingertip feedback significantly reduces contact force error during precise manipulation, improves trial-to-trial consistency, and enhances overall user experience in axial probing tasks. These findings establish the N2D Haptic Glove and directional finger-based haptics devices as a promising modality for contact-rich teleoperation, immersive virtual reality simulations, and robot learning from demonstrations. N2D Haptic Glove's hardware and software system will be fully open-sourced at \href{https://ucsdarclab.github.io/n2d-glove/}{this https URL}.
We present a system of two wearable pneumatic haptic devices that supports continuous, closed-loop, bidirectional tactile interaction at perceptually relevant force and temporal scales. A single device can contain up to twelve pressure sensing channels connected to textile-based pneumatic pouches. Each channel in a device can be used as a sensor, an actuator, or both. As an actuator with integrated sensing, the channel generates stable skin indentation through local closed-loop control. As a sensor, a channel can be mounted (or worn) on any surface, including on a robot gripper or on the human body, and used to measure touch interactions with the environment or a human user. A distributed architecture supports sustained pressure output, rapid dynamic response, and wireless pairing of identical devices in a system to transmit and reproduce tactile pressure signals in real time. Device-level characterization demonstrates force bandwidth exceeding 30 Hz, rapid and well-damped step responses, and extended pressure retention compared to prior compact pneumatic platforms. Human studies show that pressure-based fingertip feedback enables discrimination of force and stiffness, improves teleoperated manipulation by reducing applied pressures by up to 23.1% and task duration by up to 27.4%, and lowers subjective mental workload by 18.8%, particularly under visually constrained conditions. By unifying tactile sensing and haptic feedback within a single pneumatic modality, the device provides a practical foundation for bidirectional touch interaction in teleoperation.
We present ART-Glove, an articulated tactile glove designed to capture contact-grounded dexterous demonstrations while preserving human dexterity. ART-Glove makes hand-side contact geometry explicit with 16 rigid functional surfaces covering the fingers, thumb, and palm. Twenty-two anatomically aligned joints connect these surfaces and allow them to follow human hand motion during dexterous manipulation. Encoder-based sensing tracks surface motion, while dense piezoresistive tactile sensing records contact over the same surfaces. The complete system captures synchronized 22-DoF joint measurements and 2048-taxel tactile measurements at 120 Hz. We evaluate ART-Glove across experiments on motion freedom, joint sensing, tactile sensing, and contact-rich interaction capture, demonstrating its ability to preserve human dexterity while recording contact-grounded information that can support downstream dexterous robot learning.
Collecting high-quality robot data for contact-rich manipulation tasks is essential for enabling robots to acquire real-world skills. However, existing data collection solutions often lack the capability to obtain stable and high-frequency tactile feedback, limiting their effectiveness in contact-rich manipulation scenarios. In this work, we propose a versatile teleoperation system with tactile-driven assistance to enable high-frequency and stable contact-rich manipulation. The proposed XRoboToolKit-T teleoperation system incorporates a tactile-informed force control architecture, designed to ensure both stable and precise force control in contact-rich manipulation during teleoperation. The stabilizer haptic module rapidly analyzes the normal force distribution and infers pseudo shear force, enabling real-time tactile-based assistance during manipulation. The refiner haptic module integrates a vision-language-action model to predict and refine manipulation actions based on tactile sensing data and task descriptions. We apply the proposed teleoperation system to challenging contact-rich manipulation tasks, including grasping a deformable rubber pipette for liquid transfer and inserting a medical syringe into a vascular training pad, to demonstrate the effectiveness of tactile-informed force control. Furthermore, the system achieves higher data collection efficiency and improved manipulation stability compared to state-of-the-art teleoperation without tactile assistance.