Humans rely on directional fingertip forces to probe and regulate contact during manipulation, yet most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous. Without directional cues, users must infer contact force from vision alone, often leading to over-pressing, inconsistent control, and reduced precision in robotic teleoperation. We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback. Through benchtop validations and a user study involving haptic teleoperation of a robotic arm and hand, we demonstrate that compared to visual-only and single-axis haptic baselines, planar fingertip feedback significantly reduces contact force error during precise manipulation, improves trial-to-trial consistency, and enhances overall user experience in axial probing tasks. These findings establish the N2D Haptic Glove and directional finger-based haptics devices as a promising modality for contact-rich teleoperation, immersive virtual reality simulations, and robot learning from demonstrations. N2D Haptic Glove's hardware and software system will be fully open-sourced at \href{https://ucsdarclab.github.io/n2d-glove/}{this https URL}.
We present a system of two wearable pneumatic haptic devices that supports continuous, closed-loop, bidirectional tactile interaction at perceptually relevant force and temporal scales. A single device can contain up to twelve pressure sensing channels connected to textile-based pneumatic pouches. Each channel in a device can be used as a sensor, an actuator, or both. As an actuator with integrated sensing, the channel generates stable skin indentation through local closed-loop control. As a sensor, a channel can be mounted (or worn) on any surface, including on a robot gripper or on the human body, and used to measure touch interactions with the environment or a human user. A distributed architecture supports sustained pressure output, rapid dynamic response, and wireless pairing of identical devices in a system to transmit and reproduce tactile pressure signals in real time. Device-level characterization demonstrates force bandwidth exceeding 30 Hz, rapid and well-damped step responses, and extended pressure retention compared to prior compact pneumatic platforms. Human studies show that pressure-based fingertip feedback enables discrimination of force and stiffness, improves teleoperated manipulation by reducing applied pressures by up to 23.1% and task duration by up to 27.4%, and lowers subjective mental workload by 18.8%, particularly under visually constrained conditions. By unifying tactile sensing and haptic feedback within a single pneumatic modality, the device provides a practical foundation for bidirectional touch interaction in teleoperation.
We present ART-Glove, an articulated tactile glove designed to capture contact-grounded dexterous demonstrations while preserving human dexterity. ART-Glove makes hand-side contact geometry explicit with 16 rigid functional surfaces covering the fingers, thumb, and palm. Twenty-two anatomically aligned joints connect these surfaces and allow them to follow human hand motion during dexterous manipulation. Encoder-based sensing tracks surface motion, while dense piezoresistive tactile sensing records contact over the same surfaces. The complete system captures synchronized 22-DoF joint measurements and 2048-taxel tactile measurements at 120 Hz. We evaluate ART-Glove across experiments on motion freedom, joint sensing, tactile sensing, and contact-rich interaction capture, demonstrating its ability to preserve human dexterity while recording contact-grounded information that can support downstream dexterous robot learning.
Collecting high-quality robot data for contact-rich manipulation tasks is essential for enabling robots to acquire real-world skills. However, existing data collection solutions often lack the capability to obtain stable and high-frequency tactile feedback, limiting their effectiveness in contact-rich manipulation scenarios. In this work, we propose a versatile teleoperation system with tactile-driven assistance to enable high-frequency and stable contact-rich manipulation. The proposed XRoboToolKit-T teleoperation system incorporates a tactile-informed force control architecture, designed to ensure both stable and precise force control in contact-rich manipulation during teleoperation. The stabilizer haptic module rapidly analyzes the normal force distribution and infers pseudo shear force, enabling real-time tactile-based assistance during manipulation. The refiner haptic module integrates a vision-language-action model to predict and refine manipulation actions based on tactile sensing data and task descriptions. We apply the proposed teleoperation system to challenging contact-rich manipulation tasks, including grasping a deformable rubber pipette for liquid transfer and inserting a medical syringe into a vascular training pad, to demonstrate the effectiveness of tactile-informed force control. Furthermore, the system achieves higher data collection efficiency and improved manipulation stability compared to state-of-the-art teleoperation without tactile assistance.