Real-time trajectory generation for on-orbit robotic servicing is challenging due to the nonlinear coupling between spacecraft bus motion, manipulator dynamics, visibility cone, and trajectory-level safety constraints. This paper studies learning-based warm-starting for sequential convex programming (SCP) in the terminal approach of a space manipulator toward a tumbling target. The proposed framework decomposes the problem into a system center-of-mass translational planning stage and a coupled attitude--manipulator torque-allocation stage, and applies a causal transformer warm-start to the latter, which constitutes the dominant computational bottleneck. Linear and flow matching action decoders are compared under different action-chunking and training dataset sizes, and the resulting warm-starts are evaluated under both cost-optimal and feasibility projection using SCP. Across 300 held-out scenarios, the learned warm-start reduces the second-stage SCP iteration count by up to 28% and the runtime by 23% while preserving the final control-cost distribution. When the learned warm-starts are used for nonconvex feasibility projection, they nearly halve the runtime relative to cost-optimal SCP, while avoiding the catastrophic high-cost tail behavior observed when initialized heuristically. These results indicate that sequence-model warm-starts can improve both the computational efficiency and trajectory robustness of optimization-based terminal guidance for space manipulation.
Autonomous spacecraft guidance and control requires a fast solution to non-convex trajectory optimization, which can be accelerated by providing a near-optimal initial guess to an optimization protocol, i.e., warm-starting. A robust warm starting method is especially useful for rendezvous, proximity operations, and docking (RPOD) in cislunar space, where the underlying dynamics become severely nonlinear and chaotic compared to those in Earth orbit, especially at perilune. This paper extends the Autonomous Rendezvous Transformer (ART), a transformer-based warm-start trajectory generation method, to cislunar RPOD scenarios for the first time. To accurately and reliably solve the nonconvex optimal control problems (OCPs) posed by these scenarios, a new and enhanced version of ART, ART-TWIN (Two-Way INference), is introduced. Inspired by forward-backward shooting methods used in other trajectory design applications, ART-TWIN autoregressively generates two arcs, one from the initial state and one from the desired terminal state, that are patched together at the midpoint of the timeseries. When evaluated on a set of simulated rendezvous scenarios that are initialized at perilune, ART-TWIN is demonstrated to substantially accelerate convergence and increase feasibility guarantees when used as a warm-start to sequential convex programming (SCP), compared to convex relaxations and the original ART. These results illustrate the necessity of ART-TWIN's dual-arc generation to enable the viability of and gain benefits from using transformer-based warm-start methods in the most challenging areas of the cislunar dynamical regime.
The strong dynamic coupling between the manipulator and the base poses a significant challenge to maintaining spacecraft attitude stability, potentially compromising mission safety. In this paper, we propose a Dual-Agent Coordinated Manipulation Planning (DACMP) framework that simultaneously achieves high-precision end-effector pose reaching for a 6-DoF space manipulator and attitude stabilization of the base spacecraft. To enhance learning efficiency, we present a prior policy-guided Deep Reinforcement Learning algorithm incorporating the Timestep-level Expert Switching Guidance (TESG) mechanism, thereby promoting global convergence and improving task success rates. Extensive experiments demonstrate that DACMP significantly outperforms baseline DRL algorithms in terms of task success rate and control precision. Furthermore, the robustness of DACMP is validated under various challenging scenarios, including system constraints, environmental disturbances, and perception uncertainties. The code and simulation configurations are available on GitHub: https://github.com/HIT-YuhuiHu/DACMP.
Centralized trajectory optimization in the joint space of multiple robots allows access to a larger feasible space that can result in smoother trajectories, especially while planning in tight spaces. Unfortunately, it is often computationally intractable beyond a very small swarm size. In this paper, we propose Flow-Opt, a learning-based approach towards improving the computational tractability of centralized multi-robot trajectory optimization. Specifically, we reduce the problem to first learning a generative model to sample different candidate trajectories and then using a learned Safety-Filter(SF) to ensure fast inference-time constraint satisfaction. We propose a flow-matching model with a diffusion transformer (DiT) augmented with permutation invariant robot position and map encoders as the generative model. We develop a custom solver for our SF and equip it with a neural network that predicts context-specific initialization. The initialization network is trained in a self-supervised manner, taking advantage of the differentiability of the SF solver. We advance the state-of-the-art in the following respects. First, we show that we can generate trajectories of tens of robots in cluttered environments in a few tens of milliseconds. This is several times faster than existing centralized optimization approaches. Moreover, our approach also generates smoother trajectories orders of magnitude faster than competing baselines based on diffusion models. Second, each component of our approach can be batched, allowing us to solve a few tens of problem instances in a fraction of a second. We believe this is a first such result; no existing approach provides such capabilities. Finally, our approach can generate a diverse set of trajectories between a given set of start and goal locations, which can capture different collision-avoidance behaviors.