PAIWorld: A 3D-Consistent World Foundation Model for Robotic Manipulation

The potential impacts of world models (WMs, i.e., learned simulators) on robotics are far-reaching -- policy evaluation, policy improvement, and test-time planning -- all with limited real-world interaction. To unlock these downstream capabilities, a WM needs to jointly satisfy three desiderata: $\textit{(i)}$ fidelity (i.e., producing simulated trajectories that correlate with reality), $\textit{(ii)}$ consistency (i.e., producing simulated trajectories that are coherent over long horizons), and $\textit{(iii)}$ efficiency (i.e., producing simulated trajectories quickly). We propose WEAVER (World Estimation Across Views for Embodied Reasoning): a WM architecture that simultaneously achieves all three desiderata, providing state-of-the-art results on robotic manipulation tasks. WEAVER is a multi-view WM trained to predict future latents and reward values via a flow-matching loss. We distill the key design decisions across model architecture, memory, and prediction objectives required to unlock the kinds of long-horizon dynamic manipulation tasks that have confounded prior world modeling approaches. We apply WEAVER in robotic hardware, demonstrating its effectiveness at policy evaluation ($ρ$=0.870 correlation with real-world success rate), policy improvement (real-world success rate improvement of $38\%$ on top of the $π_{0.5}$ robot foundation model), and test-time planning (real-world success rate improvement of $14\%$ with a $5-10\times$ speedup over prior WMs). WEAVER also demonstrates better performance than prior WMs when evaluated on out-of-distribution scenarios. Code, models, and videos at: https://arnavkj1995.github.io/WEAVER/ .

World models enable agents to perform forward rollout and planning without real-world interaction. However, their application in open-world embodied intelligence remains limited by the high cost of action annotations and the heterogeneity of action spaces across platforms. Recently, latent action models (LAMs) have alleviated this bottleneck by learning action representations directly from unlabeled human videos in a self-supervised manner. Nevertheless, most existing LAMs rely on single-view inputs and operate primarily in 2D pixel space, raising a fundamental question: can simply incorporating multi-view videos into LAM training endow the learned latent actions with 3D-aware perception? Our study shows that the answer is negative. The primary reasons lie in future-frame appearance leakage as well as inter-camera appearance discrepancies and viewpoint variations. To address these issues, we propose LAWM-3D, which introduces three tightly coupled key designs: (1) a multi-view invariant unified action tokenization scheme for learning 3D-aware latent actions; (2) a geometric alignment constraint that anchors intermediate encoder features to a pretrained 3D foundation model, thereby explicitly providing cross-view geometric correspondences; and (3) a non-injective RGB-D joint reconstruction objective that prevents shortcut learning from future-frame appearance information, forcing the LAM to focus supervision on motion cues with geometric significance. Importantly, these components are not simply stacked but are tightly coupled through a unified motivation. Built upon a two-stage paradigm of large-scale human video pretraining followed by robot fine-tuning, extensive experiments demonstrate that the proposed 3D-aware latent actions significantly improve world model performance, achieving SOTA results in generation quality, physical consistency, and generalization ability.

We present \textbf{DreamX-Phi 1.0}, an action-conditioned video world model for robotic manipulation that, given an observed frame, a language instruction, and a prescribed action sequence comprising end-effector poses and gripper states, predicts the resulting future observations. Yet realism alone does not guarantee faithfulness: a convincing rollout can still move the wrong arm or lose the manipulated object. To ensure the prediction respects each arm's commanded path, we inject per-arm $\mathrm{SE}(3)$ transformations into attention via \textbf{PRoPE-style geometric encoding}, preserving arm identity and rigid-motion structure. Action control alone does not fully constrain scene geometry or the evolution of small manipulated objects. We therefore add a lightweight \textbf{depth branch} for scene-level geometry and use \textbf{SAM3 masks} with a frozen \textbf{V-JEPA teacher} to maintain object consistency throughout grasping. We further distill the multi-step generator into a few-step student via distribution-matching distillation for efficient deployment. At the time of writing, \model{} achieves first place on Track1 and second place on Track2 of the WorldArena~2.0 Challenge. Our model and code will be publicly available.