Sit-to-stand (STS) transitions impose significant joint-loading demands on elderly individuals, making them a primary target for lower-limb exoskeleton assistance. However, accurate trajectory tracking during STS is challenging due to complex, time-varying human exoskeleton interaction dynamics and inter-subject variability that render model-based control approaches difficult to apply in practice. This paper presents an intelligent model free adaptive backstepping control strategy for a bilateral lower-limb exoskeleton during STS motion. The proposed controller design uses an ultra-local second-order model to avoid explicit system identification, while a Gaussian radial basis function (RBF) neural network estimates the unknown lumped dynamics online. To further improve phase-aware tracking performance, a Twin Delayed Deep Deterministic Policy Gradient (TD3) reinforcement learning agent is integrated as a supervisory gain scheduler that adaptively adjusts controller gains across the distinct phases of STS motion. The proposed controller is evaluated through co-simulation in MATLAB/Simulink and Simscape Multibody using OpenSim-derived reference trajectories and benchmarked against state-of-the-art controllers. Results demonstrate that the proposed controller achieves the lowest average RMSE of 0.078 degree across all joints, representing improvements of 60.2%, 54.4%, 48.7%, and 42.6% over proportional integral derivative (PID), model-free adaptive control (MFAC), linear quadratic regulator (LQR), and sliding-mode control (SMC), respectively. TD3 integration further reduces tracking error by 35%, 33%, and 79% at the hip, knee, and ankle joints compared to the standalone RBF-MFAC baseline. These results demonstrate the effectiveness and robustness of the proposed controller design for assistive exoskeleton control during STS transitions.
Daily locomotion encompasses diverse activities and frequent transitions between them, yet most exoskeleton controllers are designed for a single activity or a narrow set of related movements. Changes in activity therefore typically require explicit mode switching and separately tuned or retrained controllers. Simulation-based learning reduces the need for hardware-based tuning but generally retains this limitation. Here we present UniExo, a framework that first constructs a multi-skill musculoskeletal human policy and then jointly trains an exoskeleton control policy with it. Four single-skill imitation experts for walking, turning, running and backward walking are distilled into a single network structured by a skill latent and subsequently fine-tuned through reinforcement learning on transition sequences. The resultant unified human policy achieves a mean tracking success rate of 94.7% on unseen clips of the four skills and exhibits greater robustness to perturbations than its constituent experts. A single hip exoskeleton controller (UniExo) is initialized from hip moment prediction of the human policy and co-adapted with it through multi-agent reinforcement learning across the four skills. This co-adaptation shifts the timing of the assistance torque and raises the fraction of positive work delivered to the hip. When deployed on a custom hip exoskeleton, the controller generalizes across four treadmill speeds in six participants and assists one participant through a continuous route of all four skills and their transitions, without skill labels or explicit mode switching. UniExo thus provides a step towards replacing activity-specific controllers with unified, user-specific controllers that support diverse locomotor activities and the transitions between them.
Lower limb exoskeletons show promise to assist human movement, but their utility is limited by controllers designed for discrete, predefined actions in controlled environments, restricting their real-world applicability. We present an uncertainty-aware control framework that enables ankle exoskeletons to operate safely across diverse scenarios by automatically disengaging when encountering unfamiliar movements. Our approach uses an uncertainty estimator to classify movements as similar (in-distribution) or different (out-of-distribution) relative to actions in the training set. We evaluated three architectures (model ensembles, autoencoders, and generative adversarial networks) on an offline dataset and tested the strongest performing architecture (ensemble of gait phase estimators) online. The online test demonstrated the ability of our uncertainty estimator to turn assistance on and off as the user transitioned between in-distribution and out-of-distribution tasks (F1: 89.2). This new framework provides a path for exoskeletons to safely and autonomously support human movement in unstructured, everyday environments.
Fatima Mumtaza Tourk, Bishoy Galoaa, Sanat Shajan +3
Adaptive torque prediction in dynamic exoskeleton scenarios requires expensive motion capture systems, which are infeasible in complex outdoor environments. Trajectory prediction has emerged as one of the effective approaches to address such an issue. However, the core challenges of exoskeleton trajectory prediction are twofold: establishing the mapping from multi-modal features to trajectory information; constructing the mapping from trajectory to torque. For the former, most existing methods perform only single-step prediction and neglect inter-subject trajectory variability, thereby limiting the trajectory optimization space and prediction generalization. To address this, this paper proposes a fast flow matching method that enables accurate trajectory prediction and better generalization for real-time performance, where trajectory generation errors and encoded observations are used to guide the training direction. For the second challenge, due to the high dynamics of the human-robot system and the strong coupling between perception and control, simple control methods struggle to achieve efficient assistance based on the predicted trajectory. This paper utilizes model predictive control and designs a novel optimization objective to optimize torque, ensuring the exoskeleton achieves comfortable and robust assistance. By integrating the above two components, the unified policy, denoted as ExoTraj, is developed to enable adaptive assistance in complex outdoor scenarios without high data acquisition cost. Experimental results show that compared to traditional methods, ExoTraj reduces cross-subject prediction error by 14.0% during the online phase and maintains robustness against external noise. Relative to the zero torque condition, ExoTraj decreases metabolic rate by 11.5-24.4%, heart rate by 1.7-19.5%, and peak muscle activation levels by 10.9-41.3%, respectively.