cs.CVJun 21, 2026

Curvature-aware 3D length estimation of greenhouse cucumbers using RGB-D imaging and cubic spline arc-length integration

Authors: Manveen Kaur, Rajmeet Singh, Saeed Mozaffri, Shahpour Alirezaee

Read PDF
Ask AI
Cite

Copy citation

DOINot available for this paper

Abstract

Commercial greenhouse cucumber production is graded by fruit length, which drives harvest scheduling, labour allocation, and logistics. Manual measurement with thread or caliper is accurate but infeasible at commercial scale. This paper presents CucumberVision, a non-contact length estimation framework using an Intel RealSense D435 RGB-D camera. A YOLO26n instance segmentation model locates cucumbers, and SAM (ViT-B backbone) refines each detection to a pixel-precise mask. Five methods are evaluated under matched conditions: (M1) a dominant-axis skeleton scan-line baseline; (M2) PCA on the bounding-box depth point cloud; (M3) SAM mask with medial-axis skeletonisation; (M4) a hybrid keypoint-guided approach using a YOLO26-pose model predicting five anatomical landmarks (KP0--KP4) with piecewise 3D arc-length; and (M5) a novel medial arc spline method fitting a cubic spline through the 3D medial axis of the SAM mask and computing arc length by trapezoidal integration -- the first such application to elongated vegetable measurement. All methods share five-frame burst depth averaging, colour-stream intrinsic alignment, and adaptive method selection with cascading fallbacks ensuring 100% coverage. A benchmark of 48 captures across seven cucumbers in three size categories (small ~8 cm, medium ~13 cm, large ~25 cm) with thread-based ground truth establishes a significant accuracy hierarchy: M1 (MAPE 9.68%) > M2 (5.31%) > M4 (5.51%) > M3 (5.82%) > M5 (4.13%). M5 significantly outperforms all competitors at Bonferroni-corrected alpha=0.0125. A secondary contribution is identifying a 12--18% length underestimation caused by using depth-stream rather than colour-stream intrinsics after rs.align(rs.stream.color) -- an under-reported error source. The complete system is released open source and runs in real time on a single consumer-grade GPU.

Explore similar work

CardsList
Aug 10, 2026cs.CV

CableDex: Cable Length Estimation on Industrial Reels Using a Handheld Device

CableDex is a computer vision system that addresses the time-consuming and inaccurate manual measurement of cable length on industrial reels from a single photograph captured with a mobile phone. The system combines camera calibration, instance segmentation, pose estimation, and volumetric calculation to estimate the cable length across five different reel types and various cable sizes. This system is based on an instance segmentation model trained on 1,000 manually annotated images, achieving 99.5% mAP50 with an inference time of 5.66 ms per image. Evaluated on 75 reels across five reel types, the system achieves a MAPE of 4.90%, within the 10% error tolerance commonly accepted in industrial cable-reel measurement. The demonstration presents the end-to-end pipeline, from reel label scanning and image capture to segmentation and length estimation, through the mobile application.
Francisco Guillén, Ricardo Almeida, Bruno Silva +1
Computer VisionManufacturingDevice
AskPDF
May 26, 2026cs.CV

YOLO26-RipeLoc Lite: A lightweight architecture for tomato ripeness detection and picking point localization in greenhouse robotic harvesting

In greenhouse tomato production, automated harvesting requires accurate detection of ripe tomatoes, ripeness classification, and precise picking-point localization for robotic end-effectors. This paper proposes YOLO26-RipeLoc Lite, a lightweight deep learning architecture based on YOLO26 for simultaneous detection, ripeness classification, and center-point localization of greenhouse tomatoes. The model introduces three modifications: (1) a Lightweight Feature Pyramid Network (LFPN) with depthwise separable convolutions for efficient multi-scale fusion, (2) a Ripeness-Aware Attention Module (RAAM) with dual pooling and a learnable ripeness bias vector for enhanced color-texture discrimination, and (3) a Compact Detection Head (CDH) with shared convolutions and an integrated center-point regression branch for direct grasp planning. The model is evaluated on a custom dataset of 1,500 images with 6,227 instances (3,566 ripe, 2,661 unripe) from the SILAL greenhouse, Abu Dhabi, UAE. YOLO26-RipeLoc Lite achieves mAP@0.5 of 92.9% (95.2% ripe, 90.6% unripe) with the highest precision (95.2%) among all evaluated architectures using only 2.38M parameters. Post-training BatchNorm pruning at 30% reduces parameters to ~1.8M with negligible accuracy loss. Ablation studies confirm that greenhouse-aware HSV augmentation provides the largest improvement (+2.02 pp mAP@50), backbone freezing achieves peak precision (93.8%), and 3-phase progressive unfreezing yields the best localization quality (mAP@50:95 of 64.6%). Comparisons with YOLOv8n/s, YOLO11n/s, YOLO12n/s, and YOLO26s confirm superior accuracy-efficiency: 2.9 pp higher precision than YOLO12n with 7.0% fewer parameters and integrated center-point localization for robotic end-effector guidance.
Rajmeet Singh, Manveen Kaur, Shahpour Alirezaee +1
FruitMediterranean GreenhousesYolov8-Nano ModelAgricultural RobotsAugmentation
AskPDF
Aug 3, 2026cs.CV

UAV3DCrop: Benchmarking 3D Reconstruction in Repeated Multi-Angle UAV Crop Surveys

Accurate 3D crop monitoring underpins data-driven precision agriculture by enabling field-scale analysis of plant structure, growth dynamics, and management response. Modern 3D reconstruction methods perform strongly on generic benchmarks, but rendered appearance may not translate into metrically and agronomically useful geometry in crop fields. We introduce UAV3DCrop, a public benchmark of repeated multi-angle unmanned aerial vehicle (UAV) crop surveys. It contains 88,830 RGB images at 5280×39565280 \times 3956 pixels, with a ground sampling distance of 3.6-5.8 mm, from 91 scenes spanning corn, soybean, wheat, and oat. Track A evaluates seven scene-optimized methods -- Neural Radiance Field (NeRF) and 3D Gaussian Splatting (3DGS) variants -- on held-out views, photogrammetry-referenced depth, and canopy-height recovery. Track B tests four pretrained feed-forward models on zero-shot camera-pose and geometry estimation. The scene-optimized methods rank differently across the three targets: Splatfacto-big leads appearance, whereas Scaffold-GS leads depth and is statistically tied with Splatfacto for canopy height. Among feed-forward models, MapAnything leads on seven of the eight metrics, while the remaining models vary more across crops and fail severely on absolute scale in a way that alignment conceals. Repeated acquisitions reveal further sensitivities that differ by output type and by model, associated with position within the acquisition sequence and with tie-point multiplicity. Current 3D reconstruction methods are therefore not yet interchangeable for agronomic use: no single method wins on appearance, geometry, and canopy height at once, and only one of four feed-forward models recovers usable metric scale. The dataset is publicly available at https://link-dev.github.io/UAV3DCrop/
Junxiong Zhou, Xuechen Li, Chonghao Qiu +11
Crop3D ReconstructionAgricultural LandscapesCanopyImage CroppingUnmanned Aerial Vehicles
AskPDF