Organizations: Beijing Institute of Technology, Beijing, China
Abstract
Compliant joints can embed safety and adaptability into dexterous hands, but achieving large-stroke anthropomorphic motion while maintaining joint-specific, directiondependent stiffness and reliable proprioception remains challenging. This paper presents the PDS joint, a parametric doublespiral (PDS) compliant joint that enables systematic shaping of directional stiffness across multiple deformation modes, including flexion/extension, abduction/adduction, and pronation/supination. We instantiate the joint using Archimedean and logarithmic spiral templates for different hand joints and introduce an asymmetry ratio to tailor stiffness distributions for both grasp stability and hyperextension resistance. To make the joint practically usable under large deformation, we co-design embedded inductive proprioception and propose a learningbased calibration pipeline that maps raw inductive signals to joint states using ArUco-marker tracking. Experiments characterize the stiffness landscapes across geometric parameters and demonstrate a non-monotonic dependence of lateral support on asymmetry, indicating the importance of principled parameter tuning. For joint-state estimation in the most challenging abduction/adduction motion, a learned multilayer-perceptron (MLP) mapping reduces the error compared with conventional curve fitting by 41.6%. Finally, we integrate the proposed joints into an open-source dexterous hand as a demonstration platform, on which the hand grasps a set of nine everyday objects and performs safe, contact-rich human-involved interactions.
In-hand object manipulation is a fundamental yet challenging capability for dexterous robots. Despite significant progress in dexterous manipulation, existing approaches rely heavily on vision or tactile sensing to track object states, while joint sensing -- the most readily available modality on any robotic hand -- remains largely overlooked, particularly for tendon-driven hands. In this paper, we study how far joint sensing alone can go by asking: (i) whether motor encoders or direct joint sensing provides better proprioceptive feedback, (ii) how to extract environment information from joint measurements, and (iii) whether joint-only control can achieve competitive real-world performance without external perception. We present the Proprioceptive Transformer (PT), an exteroceptive-free approach for continuous cube rotation on a tendon-driven dexterous hand that uses only joint sensing feedback. A teacher policy is first trained via reinforcement learning with privileged object information, then distilled into PT, which operates solely on joint position and velocity histories. The Transformer architecture effectively extracts implicit object state information from temporal patterns in joint sensor readings. Experiments on the real ORCA hand show that our approach achieves 3.1x higher rotation speed than baselines. We also demonstrate that our PT achieves a 23.4% lower RMSE for cube position estimation than the MLP baseline, indicating superior extraction of exteroceptive information from proprioceptive sources.
Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.
Human hand grasp adaptation depends mainly on the synergy between physical structure and biological feedback. Inspired by this biomechanical principle, the Safe Thumb-Index Robotic (STIR) Hand was developed as a minimal, lightweight, and low-cost two-digit prototype featuring an asymmetric thumb-index configuration. By pairing an underactuated, tendon-driven mechanical design with flexible strain gauges embedded into silicone-encapsulated soft joints, the system achieves passive grasp adaptation while establishing both internal proprioception and external perception. Unsupervised analysis was carried out on a dataset of the STIR hand grasping 20 different objects, along with an object classification task and an ablation study to highlight the contribution of the soft joint sensors. The object classification task discriminated object size, shape, and material stiffness with a high classification accuracy. In contrast to traditional industrial grippers and robotic hands, the STIR Hand demonstrates that sensorized compliant joints significantly improve overall sensitivity and ensure safe grasping, while remaining independent of additional fingertip tactile elements or external vision systems. Finally, a comparison to similar devices grasping identical objects validates the utility of the STIR Hand.
Jonas Papenbrock, Shubhan Patni, Tomaso Lisini Baldi +4