Improvement of Robot's Simultaneous Localization and Mapping Using an Effective Transformation to Achieve Linear Model

Robotic localization under changing sensing conditions can suffer from biased errors and miscalibrated covariances. We present WRAP, an adapter-agnostic Wasserstein-robust plug-in for nonlinear extended Kalman filter (EKF) and error-state Kalman filter (ESKF) stacks. A causal module supplies time-varying effective process and measurement statistics; a mean-preserving Wasserstein local update then computes least-favorable covariances and a robust gain without changing the propagation model, residual, or retraction. This separates mean adaptation from covariance robustification and uses distinct radii for propagation and sensing. On 18 UWB--IMU sequences held out from adapter training, adapter-only and WRAP reduce mean 3-D position RMSE by $19.8\%$ and $27.4\%$ relative to the nominal ESKF; an isotropic ablation reaches $19.5\%$, linking the incremental gain to directional process-covariance redistribution. An in-sample GNSS--INS study shows that mean adaptation provides most of the accuracy gain, while DR improves consistency and mitigates over-tightened classical covariance estimates. The robust solve takes 0.05 ms for UWB and 2.92 ms for GNSS on a Jetson Orin Nano.

Indoor localisation techniques suffer from attenuated Global Navigation Satellite System (GNSS) signals and from the accumulation of unbounded drift by integration of proprioceptive sensors. Magnetic field-based Simultaneous Localisation and Mapping (SLAM) reduces drift through loop closures by revisiting previously seen locations, but extended exploration of unseen areas remains challenging. Recently, magnetometer arrays have demonstrated significant benefits over single magnetometers, as they can directly estimate the odometry. However, inconsistencies between magnetometer measurements negatively affect odometry estimates and complicate loop closure detection. We propose two filtering algorithms: The first focuses on magnetic field-based SLAM using a magnetometer array (SLAMma). The second extends this to jointly estimate the magnetometer calibration parameters (SLCAMma). We demonstrate, using Monte Carlo simulations, that the calibration parameters can be accurately estimated when there is sufficient orientation excitation, and that magnetometers achieve inter-sensor measurement consistency regardless of the type of motion. Experimental validation on ten datasets confirms these results, and we demonstrate that in cases where single magnetometer SLAM fails, SLAMma and SLCAMma provide good trajectory estimates with, more than 80% drift reduction compared to integration of proprioceptive sensors.

Inertial navigation systems aided by three-dimensional landmark measurements constitute a fundamental problem in robotic perception and state estimation. Classical SO(3)-based Extended Kalman Filter (SO(3)-EKF) approaches provide practical solutions, but suffer from the false observability problem, in which the filter becomes overconfident in unobservable directions, leading to degraded estimation performance. The Invariant EKF (IEKF) addresses this limitation by reformulating the system dynamics as a group-affine system on a Lie group, although its measurement update does not fully satisfy certain state compatibility properties. More recently, the Iterated Invariant EKF (IterIEKF) was proposed to further improve the IEKF by ensuring, in the low-noise regime, that the estimated state remains on the observed state manifold while the uncertainty is confined to its tangent space. In this work, we formulate and apply the IterIEKF to landmark-based inertial 3D localization for the first time. Through numerical simulations, we show that the proposed approach outperforms the classical SO(3)-EKF, the Iterated SO(3)-EKF, and the IEKF in terms of both estimation accuracy and consistency.