Robots working in unstructured or partially unobservable environments must combine accurate motion with physical compliance that can passively correct contact misalignment. Soft robots provide this compliance but have struggled to precisely control their tip compliance and position. This paper presents a robot architecture designed around that control problem: a 7-link arm whose six articulated joints provide twelve independently driven revolute axes, each actuated by an antagonistic pair of pneumatic muscles, so that every axis can simultaneously change its angle and linearly adjust its stiffness. The rigid articulated backbone makes the tip compliance and position of the arm predictable enough to be commanded quantitatively in real time. The robot employs a unified iterative inverse-kinematics and inverse-compliance controller to achieve simultaneous, quantitative control of both compliance and position. The task-space compliance and kinematics models and the control law are derived and verified on both the physical arm and a matched simulation. Simulation is then used to study how the same framework extends to other arm morphologies. Finally, the arm demonstrates tasks that have been difficult for both rigid and soft arms: rejecting disturbances while writing on a moving whiteboard, and passively correcting hidden misalignment during a key-insertion and drawer-opening task. That these tasks succeed under so straightforward a controller is evidence for the advantage of this algorithm-informed structural design.
Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400g and recovery from a 7N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.
The paper proposes a robot-agnostic compliant-control framework that extends the ROS control ecosystem with standardized joint and Cartesian command interfaces. It addresses a key limitation of existing control software: no reusable infrastructure for implementing compliant-control algorithms across different manipulators while preserving a common interface to higher-level applications. A plugin-based architecture separates controller infrastructure from control-law implementation. Generic wrappers use existing hardware abstractions to interface with different manipulators, while runtime-loaded plugins implement only the control law. Command interfaces support joint- and Cartesian-space references, stiffness and damping gains, nullspace targets, and feedforward terms, enabling variable impedance and diverse compliant-control formulations. Robot kinematics and dynamics are computed from URDF models using Pinocchio. The architecture facilitates the development of compliant-control strategies and enables the same implementation to be deployed across platforms unchanged. The complete framework, including reference controllers, high-level task interfaces, and example configurations for various manipulators, is open-sourced. The reference Cartesian impedance controller supports task-dependent compliance by rotating translational and rotational stiffness and damping, allowing the principal compliance directions to be updated online according to local task geometry rather than remaining fixed in the robot base or TCP frame. This is particularly important in contact-rich manipulation, where the desired directions of motion, constraints, and compliance directions may vary throughout task execution. Real-robot experiments demonstrate task-dependent compliance in contact-rich manipulation, while simulations show portability across manipulators with distinct kinematic and dynamic characteristics.
In animals such as elephants and octopuses, acquiring non-visual information about an object and physically engaging with it are inseparable processes mediated by rich, large-area interactions between compliant appendages and the environment. Soft robots provide a natural platform for translating this principle into engineered systems. Yet current robotic intelligence makes limited use of physical interaction, treating it primarily as a disturbance to be rejected or, at best, as a means of compensating for object misalignment. Here, we introduce a physical intelligence framework in which distributed compliant interactions jointly reveal task-relevant information and organize manipulation behavior. This results in an intrinsically partially observable problem: key task-relevant information is never measured directly, but must instead be inferred from the history of physical interactions. We propose a reinforcement-learning architecture that addresses this challenge by learning a memory-based control policy end-to-end. The key innovations making this possible are (i) a pretrained exploration policy that provides a reference for broad workspace exploration, (ii) joint optimization that integrates exploration and grasping objectives within a single recurrent policy, and (iii) a two-stage sim-to-real adaptation including observation mapping and policy fine-tuning. We demonstrate this principle through blind whole-arm grasping with a hybrid rigid-soft robotic arm that we equip with IMUs embedded directly within its compliant structure, providing its only source of proprioceptive sensing. The learned policy successfully identifies and grasps various objects by autonomously coordinating workspace exploration, object encounter and localization, inference of grasp-relevant properties, and stable whole-arm wrapping.