AD-MPCC: Adaptive Differentiable Model Predictive Contouring Control for Autonomous Racing

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

Autonomous race cars, such as in Formula Student Driverless, operate close to their physical handling limits. The resulting highly nonlinear vehicle behavior increases the path tracking complexity, especially on narrow tracks. Model Predictive Control (MPC) is commonly used to address this issue, a method whose performance is closely tied to the accuracy of the underlying prediction model. This paper presents a novel, real-time capable prediction model for autonomous race cars that adjusts to changing conditions by combining information from past runs and the current driving situation. Our model is divided into three consecutive submodels: a nominal Kinematic Bicycle Model, an offline Bayesian Linear Regression (BLR) model, and an online Sparse Gaussian Process Regression (SGPR) model. The proposed approach enables efficient integration of all available data without significantly increasing computational cost, ensuring high prediction accuracy and a quantitative uncertainty assessment right from the start of the run. Compared to existing approaches, an improvement in prediction accuracy of up to 57% was achieved. Further, we successfully demonstrated the practical applicability of the model within an MPC-based path tracking controller on a real Formula Student race car.

Autonomous racing overtaking requires balancing competitive performance with safety under nonlinear vehicle dynamics and real-time constraints. Model Predictive Control (MPC) combined with Control Barrier Functions (CBFs) provides a principled mechanism for certifying forward invariance of a safe set. However, commonly used fixed-decay discrete-time CBF formulations can become overly conservative in interactive racing scenarios, limiting overtaking performance and requiring manual tuning across track conditions. This paper proposes a hierarchical overtaking framework that explicitly separates maneuver-level decision making from safety-certified trajectory control, reducing conservatism while preserving safety. A high-level Mixed-Integer Quadratic Program (MIQP) resolves the combinatorial passing-side selection problem by selecting a feasible overtaking topology, while a nonlinear Frenet-frame MPC enforces vehicle dynamics and safety through embedded discrete-time CBF constraints. This decomposition isolates the combinatorial complexity of maneuver selection from the continuous trajectory optimization. To further mitigate the sensitivity of fixed-decay barrier constraints, a reinforcement learning policy adapts the discrete-time CBF decay parameter online, enabling context-dependent modulation of safety margins without directly controlling vehicle inputs. Simulation and scaled-hardware experiments show that no single fixed decay parameter achieves uniformly strong performance across tracks, whereas the adaptive strategy attains the highest aggregate success rate and consistently strong safety--performance trade-offs without per-track tuning, improving robustness to environment variation while maintaining safety constraint satisfaction in nominal operation.