cs.ROJul 15, 2026

Kepler-Encoder-v0.1: Towards a Multimodal Embedding Model for Robots

Authors: Ishneet Sukhvinder SinghDhanoosh PooranakumaranAlex NguyenJia Qi Yip

Organizations: Menlo Research

Abstract

A robot must understand the state of its own body, but a camera sees only part of it. Force and contact leave almost no trace in a single frame, and raw vision features read force at R2R^2 at or below 0.100.10 on every robot we test. We present Kepler-Encoder-v0.1, a robot-first multimodal encoder that treats robot state as a modality and fuses vision, proprioception, and force/torque into a single shared latent with a learned-query cross-attention layer, trained self-supervised by masked cross-modal prediction under the LeJEPA/SIGReg objective. At evaluation only vision enters, which poses a sharp question. Does fusing state into training make the vision-only latent carry anything the pixels do not already contain? On the RH20T corpus the answer is yes, precisely where the camera is weakest. On held-out scenes, the vision-only latent recovers end-effector state, and force in particular, significantly above both raw frozen-ViT features and a compute-matched vision-only control on every sensored robot, though absolute force recovery at a single timestep is modest; on motor state, which the camera largely sees, it is statistically tied with the strongest vision baselines, and it is the only feature whose latent geometry tracks state. A single embodiment-agnostic encoder covers four robots, and a data-matched control shows this breadth reflects embodiment diversity rather than data volume. The frozen latent is directly useful. Its own cross-modal prediction error is a training-free invalid-state monitor (AUROC 0.900.90 on out-of-range states, 0.690.69 on scene-swapped states), and a diffusion decoder (PixNerd) reconstructs the camera frame from the latent, confirming the spatial compression preserves world-state. This report validates the single-timestep case; native-rate temporal fusion is the next step.

Explore similar work

Jun 25, 2026cs.CV

OctoSense: Self-Supervised Learning for Multimodal Robot Perception

We present OctoSense, an open-source sensor platform with stereo RGB and event cameras, LiDAR, a thermal camera, an inertial measurement unit, RTK-corrected global positioning system, and proprioception (CAN bus data from a car, and joint angles for a quadruped robot). The eponymous OctoSense dataset contains 59 hours of time-synchronized driving data across different types of environments at different times of the day, including situations with highly degraded sensors. We demonstrate multi-modal self-supervised learning using such real-world robotics data, where sensors have different representations, frequencies, latencies and noise. Our approach, a "late-fusion" masked autoencoder, (i) uses modality-specific tokenizers to account for different spatiotemporal characteristics of these sensors, and (ii) caches modality-specific tokens at inference time to process new measurements as they come. This architecture (i) is fast (6.68 ms and 112 ms on NVIDIA 5090 and Orin NX respectively, to compute the representation), (ii) performs better than existing image-only foundation models on tasks such as estimation of optical flow, depth, semantic segmentation, and ego-motion (translation, rotation, and steering angle), and (iii) predicts robustly at nighttime or in situations where sensory data is degraded. See our project page for links to the dataset, code, and supplementary videos: https://abisulco.com/octosense/.
Anthony Bisulco, Jeremy Wang, Kostas Daniilidis +2
Jul 8, 2026cs.RO

GeoProp: Grounding Robot State in Vision for Generalist Manipulation

Proprioception is fundamental to robotic manipulation, yet standard fusion methods often treat it as an isolated vector lacking explicit alignment with visual tokens. Without a direct correspondence between 3D kinematics and 2D feature maps, manipulation policies struggle to ground the robot's state within the scene, frequently underperforming even vision-only baselines. To address this, we introduce GeoProp, a lightweight, plug-and-play adapter that aligns proprioception with vision through explicit geometric grounding and spatial feature sampling. GeoProp projects the robot state onto the image plane to sample localized visual features, constructing a grounded state token. It then injects state-derived spatial priors into the corresponding visual features via FiLM modulation. To capture motion intent, GeoProp further samples features at a short-horizon predicted coordinate derived from recent kinematics, providing look-ahead visual context. Across 67 tasks, GeoProp improves Diffusion Policy by 8.7% on 63 simulation tasks and pi_0 by 4.0% on the RoboTwin subset, and yields a 10.6% average gain across both policy families in the real world, while adding only 2-3% to the parameter count. These results demonstrate that GeoProp is a simple yet high-impact inductive bias for generalist embodied policies. Project page: https://alibaba-damo-academy.github.io/GeoProp/.
Guoyang Zhao, Quanhao Qian, Gongjie Zhang +5
Aug 6, 2026cs.RO

KILVO: Kinematic-Inertial-LiDAR-Visual Odometry with Robust Multimodal Adaptation for Humanoid Robots

This article presents a kinematic-inertial-LiDAR-visual odometry for humanoid robots, called KILVO. Tailored to the platform features, requirements, and real-world complexity, it fully utilizes the sensors commonly equipped on humanoid robots, including joint encoders, IMU, LiDAR, and camera, within an asynchronous-sequential hybrid error-state iterated Kalman filter (ESIKF). Specifically, inertial data are used for prediction, leg kinematics are processed asynchronously at a high rate and provide proprioceptive constraints, while exteroception is updated sequentially, first by registering LiDAR points for geometric priors and then by updating the visual component via photometric errors. Moreover, the framework is elaborately designed with multimodal adaptation for resilience to sensor failures. A compact contact estimation module is also developed, sharing information with state estimation without additional sensors. Extensive experiments on public datasets and in the real world across multiple humanoid robots, gait patterns, and scenarios demonstrate that KILVO achieves highly competitive accuracy, efficiency, and output rates, with strong robustness against sensor degradation and failures, making it more suitable for humanoid robots than state-of-the-art fusion methods. Our code and datasets are released on GitHub.
Jixin Gao, Fucheng Liu, Teng Zhang +1