Modeling and Validation of Quality of Control for Edge-Offloaded Collaborative Navigation

Multi-robot systems (MRS) increasingly offload compute-intensive perception tasks to edge nodes to meet strict time-sensitive Quality-of-Service (QoS) constraints. However, static task orchestration on a shared edge node can severely degrade QoS due to network latency, jitter, and edge-resource contention. We present a pilot edge-centric MRS testbed using Raspberry Pi nodes to evaluate a camera-to-manipulator pipeline under three modes: local execution, static offloading, and a QoS-aware Adaptive Task Placement (ATP) controller. ATP scores candidate placements using a multi-metric cost (normalized latency, CPU utilization, and switching overhead) over two-second control windows. The closed-loop visual servoing testbed is instrumented with sub-millisecond clock synchronization, network emulation, and detailed monitoring of multiple metrics across nodes to capture realistic jitter. Experimental results under compute-stress and network-fault scenarios show that static edge offloading reduces on-board CPU load but amplifies tail latency and deadline misses. In contrast, the QoS-aware ATP controller, by switching task placement based on measured latency and utilization thresholds, consistently lowers deadline violations and tail latency. Overall, the results position ATP as a practical edge-side control primitive for MRS and concrete design guidelines for Cloud-Edge Robotics deployments within the broader cloud-fog automation, while motivating QoS-aware multi-objective workload orchestration for industrial cyber-physical systems.

Safe and efficient robot navigation in crowds requires anticipating pedestrian motion despite uncertain and potentially shifting prediction errors. Existing reactive methods can produce oscillatory behavior, while predictive planners often treat forecasts as exact or rely on restrictive error models. Incorporating conservative uncertainty sets as hard constraints can also render model predictive control (MPC) infeasible. We propose \textit{CoCoNav}, a crowd-navigation framework that combines online conformal calibration with runtime-certified planning. A horizon-specific conformal proportional--integral controller adapts trajectory-error bounds to regulate long-run empirical coverage, enabling the framework to respond to changing prediction errors. A \textit{relax-then-verify} planner preserves solver feasibility by generating nominal trajectories with soft-constrained MPC and separately certifying them, together with contingency maneuvers, against the calibrated bounds before execution. Simulations and quadruped experiments show that CoCoNav achieves a favorable balance among collision avoidance, task success, and navigation efficiency relative to the evaluated baselines.

Current Physical AI (PAI) relies heavily on closed-loop visual-servoing pipelines, whose perception and planning stages may become computationally intensive onboard due to complex models embedded on robots. In practice, offloading the perception task to on-site edges statically is inappropriate for latency-sensitive, precise industrial settings over a standardized industrial network. This emphasizes the importance of Control-Communication-Computing (3C) co-design in industrial automation: monolithic local execution saturates AI-accelerated machine and robot hardware, while static edge offloading exposes the control loop to network jitter. Existing adaptive task placement (ATP) controllers can partially address the gap by relocating a single pipeline stage on binary threshold rules, without a multi-stage model and an explicit cost on placement switching. In this paper, we propose a directed acyclic graph (DAG) based quality-of-service (QoS)-aware dynamic task placement (DTP) framework for sensing-perception-planning-control pipelines in networked robotics. This pipeline is formalized as a DAG with task-level and node-level attributes for compute cost, communication delay, and feasible placement sets; over a small interpretable candidate set (fully local, static offload, hybrid), a window-based cost function combines tail end-to-end latency, deadline violation rate, hardware utilization, and a Hamming-distance switching penalty, and a DTP algorithm with hysteresis and a minimum dwell-time bounds placement chatter. Our work presents the theoretical framework, a structured qualitative analysis, and a two-phase simulation plus hardware-in-the-loop validation roadmap.