This paper presents a vision-informed grasp force prediction framework for robotic handling of date fruits. Addressing the dual challenge of high detachment forces and low bruise thresholds, we first conduct mechanical characterization on date samples to define a safe grasping envelope and quantify the relationship between fruit geometry and bioyield stress. In this work, we develop a Vision-to-Force (V2F) pipeline that combines computer vision-based segmentation, active-contour refinement, and geometric feature extraction with a physics-informed residual neural network that augments a Hertz contact equation. The resulting model maps non-contact visual descriptors and cultivar metadata to predict a safe grasp force with mean validation performance of R2≈0.7 across unseen cultivar groups, which is a good result given the inherent mechanical variability of biological tissue. Experimental validation using a gripper and load cell indicates that the predicted forces enable stable manipulation of different types of date fruits, with residual deformations below 1 mm and no observable damage. These results show that pre-emptive, vision-driven force estimation% can replace slow and potentially damaging tactile exploration , enabling safer robotic handling of fragile fruits.
Grasp force estimation can help prevent robots from damaging delicate objects during manipulation and improve learning-based robotic control. Integrating force sensing into deformable grippers negotiates trade-offs in cost, complexity, mechanical robustness, and performance. With the growing integration of RGB-D wrist cameras into robotic systems for control purposes, camera-based techniques are a promising solution for indirect visual force estimation. Current approaches mostly utilize end-to-end deep learning, which can be brittle when generalizing to new scenarios, while existing model-based approaches are unsuited to grasping and modern grasper geometries. To address these challenges, we developed a model-based visual force sensing approach integrating an iterative contact localization with generalization to unseen objects. The system extracts structural key points from wrist camera RGB-D images of deforming fin-ray-shaped soft grippers, and uses these key points to define parameters of an inverse finite element analysis simulation in Simulation Open Framework Architecture. The iterative contact localization sub-system utilizes a deep learning-based online 3D reconstruction and pose estimation pipeline to dynamically update contact location, and is robust to visual occlusion and unseen objects. Our system demonstrated an average root mean square error of 0.23 N and normalized root mean square deviation of 2.11% during the load phase, and 0.48 N and 4.34% over the entire grasping process when interacting with different objects under various conditions, showcasing its potential for real-time model-based indirect force sensing of soft grippers.
Robotic fruit harvesting often fails to reliably detect whether a fruit has been successfully picked, limiting efficiency and increasing crop damage. This problem is difficult due to compliant fruit and grippers, variable stem attachment, and occlusions in orchard environments. Prior work has explored vision-based perception and multi-sensor learning approaches for pick state estimation. However, minimal sensor sets and phase-dependent sensing strategies for accurate pick and slip detection remain largely unexplored. In this work, we design and evaluate a multimodal sensing suite integrated into a compliant suction-based apple gripper. Our approach is unique because it identifies which sensors are most informative at different phases of the pick, enabling predictive detection of failures before they occur. The contributions of this paper are a phase-dependent evaluation of multimodal sensors and the identification of minimal sensor sets for reliable pick state classification. Experiments in a real apple orchard show that Random Forest and Multilayer Perceptron classifiers detect successful picks and impending failures with over 90% accuracy, and Random Forest predicts pick/slip events within 0.09 s of human-annotated ground truth.
Vision-Language-Action (VLA) models have emerged as general-purpose robotic manipulation policies. However, in dexterous hand manipulation, contact forces are typically provided as separate states or force-specific representations, making it difficult to explicitly represent the spatial correspondence between force and their corresponding visual locations. In this work, we propose VisForce, which visually grounds the current and desired forces at their corresponding fingertip locations. VisForce renders current and desired visual force cues on the current wrist image and a task-specific goal image, and combines the two representations through goal-conditioned cross-attention to generate force-aware actions. We evaluate VisForce using a real UR10 robot equipped with an RH56F1 dexterous hand through force-conditioned grasping and three multi-stage manipulation tasks. In force-conditioned grasping experiments, VisForce exhibited a consistent grip-force response as the desired force increased, and achieved grasp-and-lift success rates of 70% and 80% for an egg and a toothpaste tube, respectively. It further achieved final success rates of 70%, 55%, and 40% on cup insertion/bottle pouring, tong-assisted bread transfer, and slip-modulated peg-in-hole, respectively. These results show that fingertip-aligned visual force representations can be effectively used for force-aware conditioning in VLA-based dexterous hand manipulation.