In Formula 1, drivers optimize racing lines within tire grip limits to minimize lap times; however, in rally racing, drivers intentionally break traction to drift on loose surfaces. This maneuver rapidly aligns the vehicle for corner exits, ultimately reducing lap time. Autonomously executing such maneuvers formulates a complex dual-objective control problem: stabilizing highly nonlinear drift dynamics while strictly minimizing lap time. Addressing this challenge motivates the development of advanced Minimum-Lap-Time (MLT) drift control architectures. This paper proposes a planning-control framework specifically designed for MLT drifting scenario. First, we formulate an optimal control problem to generate a MLT drift planning trajectory, which is used as prior data to train a deep reinforcement learning drift controller. Given that drifting involves extremely large sideslip angles and is therefore challenging to learn directly, a Track-guided Reinforcement Learning (TgRL) drift control method is proposed to enable progressive training in a step-by-step manner, from drift control policy, to drift corner policy, and finally to a comprehensive drift race policy. The reward function incorporates both an instant reward term and an end reward term derived from the Minimum-Lap-Time objective. Simulation results demonstrate that the proposed framework enables the agent to learn a drift racing policy that not only ensures vehicle motion control performance but also effectively reduces lap time.
Reinforcement learning has demonstrated significant potential in the field of autonomous driving. However, it suffers from defects such as training instability and unsafe action outputs when faced with autonomous racing environments characterized by high dynamics and strong nonlinearities. To this end, this paper proposes a trajectory guidance and dynamics constraints Reinforcement Learning (TraD-RL) method for autonomous racing. The key features of this method are as follows: 1) leveraging the prior expert racing line to construct an augmented state representation and facilitate reward shaping, thereby integrating domain knowledge to stabilize early-stage policy learning; 2) embedding explicit vehicle dynamic priors into a safe operating envelope formulated via control barrier functions to enable safety-constrained learning; and 3) adopting a multi-stage curriculum learning strategy that shifts from expert-guided learning to autonomous exploration, allowing the learned policy to surpass expert-level performance. The proposed method is evaluated in a high-fidelity simulation environment modeled after the Tempelhof Airport Street Circuit. Experimental results demonstrate that TraD-RL effectively improves both lap speed and driving stability of the autonomous racing vehicle, achieving a synergistic optimization of racing performance and safety.
Autonomously controlling and handling a vehicle at and beyond its stability limit is a mathematically and computationally demanding task. Prior demonstrations of automated drifting have been limited to research platforms with instantaneous torque delivery and independently actuated wheels, leaving their applicability to production vehicles with actuator latencies and mechanically coupled axles uncertain. To overcome these issues, we design a predictor to compensate for powertrain delays, develop a revised control formulation to accommodate higher actuation latencies as well as a differential coupling on the driven axle, and introduce brake-based velocity stabilization. This paper presents the controller framework, the model extensions, and real-world experimental results. We observe that our controller enables a production sports car with a combustion engine to robustly sustain circular and figure-eight drifts, limiting lateral error to 1.1 m and sideslip overshoot to 0.06 rad despite actuator delays exceeding 250 ms, while mitigating oscillations and maintaining stable path and sideslip tracking. In conclusion, our results establish that autonomous drifting is feasible on production-ready vehicles, opening pathways to advanced safety systems capable of stabilizing cars in scenarios where traditional control fails.
Frederik Werner, Till Heintzenberg, Markus Lienkamp +1
In autonomous racing, especially in competitions such as Formula Student Driverless, precise planning of the target velocity of a race car is crucial for competitive lap times and stable driving behavior. Especially at high speeds, Velocity Planning (VP) is a significant challenge as it has to be performed in real time, taking into account track layouts, environmental influences, mechanical tolerances, and the resulting control inaccuracies. In this paper, we present a novel approach to VP that dynamically adapts to such changing conditions. Instead of estimating the physical Tire-Road Friction Coefficient (TRFC), a continuous scaling factor is inferred indirectly from vehicle stability. This factor not only reflects the effective tire-road interaction but also captures effects of control inaccuracies. From this, we generate a continuous friction map, which serves as a robust, adaptive basis for computing the optimal target speed, accounting for both vehicle and environmental limits. Our proposed approach was evaluated on a real Formula Student race car, showing a lap time improvement of 35 % over ten laps and an average increase of 8 % compared to a non-adaptive approach.
Tamara Bergerhoff, Sebastian Baader, Pascal Meißner +1