Robot Learning from Human Demonstrations: Handwritten Alphabet Trajectories and Human-Likeness Evaluation
Authors: Alperen Kenan, Paul Bremner, Manuel Giuliani
Organizations: Bristol Robotics Laboratory, University of the West of England, Bristol, United Kingdom · Faculty of Electrical Engineering, Kempten University of Applied Sciences, Kempten, Germany
Learning from demonstration (LfD) provides a developmental framework through which robots can develop motor skills by observing and imitating human dynamics, reducing reliance on explicit programming to teach a skill to a robot. The resulting human-like robot motion is recognised as a key factor in building trust and enabling natural collaboration in human-robot interaction. This paper presents a framework for learning human-like robot motion from demonstration, including data collection, probabilistic trajectory learning, and perceptual user evaluation. A dataset of 3,142 handwriting demonstrations was collected from 22 participants across all 52 Latin alphabet character-case combinations via a touchscreen teleoperation interface, capturing planar position, contact force, and timing. Building on the widely used Gaussian Mixture Model and Gaussian Mixture Regression approach for learning from demonstration, the framework is extended in this work by incorporating force and normalised time dimensions to enable richer representation of human dynamics, and adapting it to handle non-continuous, multi-segment trajectories, enabling generalisation across demonstrations. A user study with 21 participants evaluated the perceived human-likeness of the generated trajectories using a continuous scale anchored between robotic and human-like motion, normalised to 0-100 where 50 represents the neutral midpoint. The generated trajectories achieved an overall human-likeness score of 71.50 (SD=22.56), indicating that the majority of trajectories were perceived as more human-like. Participants identified geometric positioning and trajectory sequence as the most influential perceptual factors, and reported positive attitudes toward human-like robot behaviour. The datasets are released as open-source, providing a reproducible benchmark for developing and evaluating human-like robot motion methods.
This paper presents a method for user-driven robot Learning from Demonstration (LfD) that reduces user effort while ensuring compliant and precise reproduction. The method eliminates repeated teaching for the same task and enables real-time learning from a single demonstration. Demonstrated motions are reproduced with high precision, while impedance variations are learned in real time to provide both compliance and robustness against perturbations. This mitigates potential safety issues in Human-Robot Interaction (HRI) that arise from conventional time-indexed trajectories lacking compliance. The proposed approach integrates a three-dimensional (3D) Fast Diffeomorphic Matching (FDM) algorithm with a Dynamical System (DS)-based motion generator to achieve real-time single-shot demonstration learning and reproduction. An Extended Kalman Filter (EKF) framework compensates for reproduction errors and recovers from external interactions. Furthermore, an impedance parameterization function is incorporated to learn impedance variations from demonstrations and maintain surface contact for specific applications. The proposed approach is validated through comprehensive experiments on a 7 Degree-of-Freedom (DOF) KUKA LWR IV+ robot.
Robot learning has advanced rapidly in learning control, but learning the physical body of a robot remains much more difficult because jointly searching over design and control creates a very large combinatorial problem. Here, we present a data-driven framework for generating robot hands from human demonstrations. Instead of learning a complex controller together with each candidate design, we generate robot hand designs using the same simple control policy used after fabrication: matching fingertip positions through inverse kinematics. Using more than 4 million frames of human fingertip motion from everyday manipulation, our algorithm optimizes tree-structured robot hands to reproduce desired target motions. The framework produced both a 6-degree-of-freedom (DoF) general-purpose hand and lower-DoF task-specific hands with spatial four-bar mimic joints. To accelerate the search over designs, we trained a reinforcement-learning (RL) actor to propose good hand designs and joint angles, reducing search time from hours to minutes. We fabricated the mechanisms directly as one-piece articulated structures with print-in-place joints. In real-world experiments, the 6-DoF hand achieved highly accurate teleoperated fingertip tracking better than available commercial robot hands, whereas the specialized 3-DoF hands reproduced structured human and synthetic trajectories with reduced mechanical complexity. These results showed that large-scale human motion data can be used not only to train robot controllers but also as a reference for optimizing and generating the physical embodiment of robots.
Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.