Authors: Sha Yi, Nicklas Hansen, Xueqian Bai, Carmelo Sferrazza, Michael T. Tolley, Xiaolong Wang
Organizations: University of California San Diego · Amazon Frontier AI & Robotics
Abstract
Robot learning has advanced rapidly in learning control, but learning the physical body of a robot remains much more difficult because jointly searching over design and control creates a very large combinatorial problem. Here, we present a data-driven framework for generating robot hands from human demonstrations. Instead of learning a complex controller together with each candidate design, we generate robot hand designs using the same simple control policy used after fabrication: matching fingertip positions through inverse kinematics. Using more than 4 million frames of human fingertip motion from everyday manipulation, our algorithm optimizes tree-structured robot hands to reproduce desired target motions. The framework produced both a 6-degree-of-freedom (DoF) general-purpose hand and lower-DoF task-specific hands with spatial four-bar mimic joints. To accelerate the search over designs, we trained a reinforcement-learning (RL) actor to propose good hand designs and joint angles, reducing search time from hours to minutes. We fabricated the mechanisms directly as one-piece articulated structures with print-in-place joints. In real-world experiments, the 6-DoF hand achieved highly accurate teleoperated fingertip tracking better than available commercial robot hands, whereas the specialized 3-DoF hands reproduced structured human and synthetic trajectories with reduced mechanical complexity. These results showed that large-scale human motion data can be used not only to train robot controllers but also as a reference for optimizing and generating the physical embodiment of robots.
Dexterous manipulation is limited by both control and design, without consensus as to what makes manipulators best for performing dexterous tasks. This raises a fundamental challenge: how should we design and control robot manipulators that are optimized for dexterity? We present a co-design framework that learns task-specific hand morphology and complementary dexterous control policies. The framework supports 1) an expansive morphology search space including joint, finger, and palm generation, 2) scalable evaluation across the wide design space via morphology-conditioned cross-embodied control, and 3) real-world fabrication with accessible components. We evaluate the approach across multiple dexterous tasks, including in-hand rotation with simulation and real deployment. Our framework enables an end-to-end pipeline that can design, train, fabricate, and deploy a new robotic hand in under 24 hours. The full framework and generated robot hands are open-sourced and available on our website.
Dexterous grasp generation across robot hands is challenging because hands differ in kinematic topology, actuation dimensions, and native command spaces. We introduce GraspGraphNet, a topology-aware grasp generation framework that represents each hand as a URDF-derived kinematic graph and directly generates executable palm poses and joint configurations. GraspGraphNet combines hierarchical object surface encoding, differentiable forward kinematics, and dynamic world-edge message passing to model evolving robot-object interactions. It applies conditional flow matching directly in executable palm-pose and joint-state space, avoiding post-processing optimization, inverse kinematics, and retargeting. Using a shared model trained on Barrett Hand, Allegro Hand, and Shadow Hand, GraspGraphNet achieves an average success rate of 83.48% with 40ms inference time per grasp on a 40-object benchmark. Without retraining, the same model achieves 72.70% success on controlled finger-removal variants, demonstrating robustness to hand-topology variations. These results suggest that graph-structured hand representations can effectively support dexterous grasp generation across robot hands with different kinematic structures. Project: https://lysees.github.io/graspgraphnet-page
Recent work in humanoid whole-body control has found success with a simple recipe: retarget human motion to robot kinematic references, then train policies via reinforcement learning (RL) to track them. But how does this recipe transfer to dexterous manipulation? The answer is not obvious, as manipulation involves complex, contact-rich dynamics and requires delicate regulation of contact modes and forces. We present REGRIND, a minimalist retargeting-guided RL pipeline that learns dexterous manipulation policies from a single human demonstration. REGRIND retargets human hand-object motion to a robot reference that preserves hand-object spatial and contact relationships, trains a residual RL policy in simulation to track object-centric keypoints along that reference, and transfers the resulting policy zero-shot to hardware with careful system identification. The resulting policies produce fluid, human-like behavior on two different multi-fingered hands across contact-rich tool-use tasks, including operating a pair of scissors and turning a screwdriver. Through systematic hardware experiments, we identify and analyze the key factors that govern sim-to-real transfer in dexterous manipulation, offering practical guidance for retargeting-based learning in contact-rich settings. Videos and code are available at https://yunhaifeng.com/REGRIND.