Parameter-Dependent LMI Synthesis for Semi-Global Differential ISS Trajectory Tracking of Nonholonomic Mobile Robots Under Multiplicative Wheel Slip
Authors: Mohammad Sabouri
Organizations: Department of Informatics, Bioengineering, Robotics, and Systems Engineering (DIBRIS), University of Genoa, Via Opera Pia 13, Genoa 16145, Italy · Applied Control & Robotics Research Laboratory (ACRRL), Department of Power and Control Engineering, School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
Abstract
This paper presents a parameter-dependent linear matrix inequality (LMI) framework for trajectory tracking of nonholonomic mobile robots subject to severe multiplicative wheel slip on variable-terrain surfaces. The sampled convex formulation, augmented with grid-to-continuum residual certification, simultaneously establishes semi-global differential input-to-state stability, a prescribed exponential decay rate, regional pole placement, and a gain-bounded feedback proxy for actuator-limited operation. A central contribution is an explicit upper bound on the additive disturbance induced by bounded multiplicative slip in the Kanayama error coordinates, bridging the physical slip mechanism and the convex synthesis paradigm. The auxiliary gain matrix and inverse storage metric are parameterized affinely in the reference velocities, while the storage metric inherits nonlinear dependence through pointwise matrix inversion. Stability is established via a cascade analysis combining variational contraction, forward invariance, slip-induced disturbance bounds, and dissipation-based trajectory reconstruction. Numerical validation compares three controllers across six reference trajectories, six disturbance classes, and a 60-second variable-terrain test featuring six severe slip patches with bidirectional slip ratios reaching +/-50%, replicated on two geometries. Supplementary studies address Gaussian sensor noise, compound stress-testing, and embedded-platform computational feasibility. Across 100 Monte-Carlo runs the proposed controller achieves complete trajectory containment within the certified envelope. On the variable-terrain scenario, peak tracking error is reduced by 12% against the fixed-gain LMI baseline and 49% against the manual baseline, with the constant-gain baseline infeasible at the prescribed decay rate.
Legged robots rely on accurate ground interaction awareness to traverse variable terrains, such as slippery surfaces. Existing slip detection methods often rely on kinematics and proprioception, which lack the sensitivity to detect early-stage slips that occur prior to catastrophic instability. Thus, this paper presents SlipSense, a novel framework for online force-based slip detection using a custom lightweight sensorized foot for quadrupeds to detect slip. The framework integrates a multimodal sensor design with a LSTM-based model to infer ground reaction forces and detect slip-indicative anomalies during locomotion. The proposed framework is deployed on a Unitree Go1 quadruped to demonstrate blind online slip detection over a slippery terrain. Our method detects early-stage slips down to an average displacement of 24.1 +/-6.4mm with an overall accuracy of 85.9%. This represents a 3.3-fold finer detection resolution and a 24% relative accuracy improvement over a standard kinematic baseline that uses foot velocity inferred through state estimation. The work in this paper serves as a foundation for force-aware gait adaptation in legged robotic locomotion, allowing future controllers to estimate terrain friction and adjust constraints, thus improving the overall stability of the system.
Iris Szu-Yao Liu, Chien Chern Cheah, Meng Yee Michael Chuah
In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware experiments, in which the robot successfully retrieves a 1 kg object from under a desk and slides a 4 kg object over a distance of 0.228 m via scooting.
Dynamic feedback linearization (DFL) is a classical technique for trajectory tracking of unicycle-type mobile robots, but the resulting DFL-based controller becomes singular when the linear velocity vanishes, rendering standard DFL-based controllers unsuitable for stop-and-reverse maneuvers. This paper proposes a quadratic-program (QP)-based optimal control framework that avoids this singularity, while establishing local Lipschitz continuity of the resulting feedback law. Our approach reformulates the DFL constraints as an equality-constrained QP with a slack variable, ensuring feasibility for all states and reference signals, including at points where the robot's velocity vanishes. By introducing slack variables and tunable parameters, we demonstrate that the singular configuration can be avoided for a large class of reference trajectories. The effectiveness of the proposed approach for trajectory tracking is demonstrated through ROS 2-Gazebo simulations on a TurtleBot3 Waffle robot. The code is available at https://gradslab.github.io/DFL_QP_Unicycle/