Ultra-Low-Impedance Robotic Gripper for High-Bandwidth and Transparent Physical Interaction

Dexterous robotic hands face a longstanding trade-off among dexterity, compactness, and affordability. Particularly, high-degree-of-freedom designs typically demand complex actuation and transmission, hindering integration into human-scale forms. To address these challenges, this work presents a compact, low-cost linkage-driven anthropomorphic hand that achieves high dexterity, structural integration, and human-hand-like functionality. The hand integrates 20 joints driven by 16 independent actuators, with all actuation, sensing, and transmission components compactly embedded within a human-hand-sized structure. The resulting prototype weighs only 320g at a total cost below USD 400. To meet these objectives, a hybrid mechanical architecture combining planar and spatial linkage mechanisms is proposed, enabling decoupled multidirectional motion, biomimetic joint synergies, and high passive load-bearing capability. The thumb further incorporates biomimetic features supporting human-like reconfiguration and opposition movements. Through the coordinated integration of these mechanisms and structural layout, the prototype achieves a highly integrated design with anthropomorphic dexterity. Experimental evaluations demonstrate that the hand achieves the maximum Kapandji score, reproduces all 33 Feix grasp types, and performs stable grasping and dexterous manipulation across a wide variety of daily objects and tools. These results validate the proposed hand as an affordable, compact, and mechanically efficient platform for dexterous manipulation, teleoperation, and robot learning in human-centered environments.

Compliance is essential for dexterous manipulation, yet existing solutions often rely on external tactile or force sensors that are costly, fragile, and difficult to deploy on low-cost robot hands. We propose a proprioception-driven framework that learns contact-aware compliance cues from motor current and joint states. Since motor current is closely related to actuator torque, it provides an intrinsic signal for perceiving contact force, object resistance, and grasp stability without additional sensing hardware. Rather than estimating external wrenches or commanding torque, our method predicts a compliance reference position: an ideal joint-position target for a standard PD controller whose induced position error generates appropriate grasping force. This position-based formulation is compatible with mainstream teleoperation and policy-learning pipelines, while enabling the robot to adapt interaction forces from real-time proprioceptive feedback. Thus, motor current serves not only as a force proxy but also as a learnable proprioceptive contact signal for compliance reference prediction. Experiments on multiple dexterous hands and contact-rich tasks, including fragile object handling, sustained surface contact, thin-object retrieval, and dynamic load adaptation, show stable compliant grasping, safer and more efficient teleoperation, and improved downstream policy learning without external tactile or force sensors.

Dexterous manipulation is fundamentally a problem of interaction dynamics: the hand must track precise finger trajectories, regulate the contact force exchanged with grasped objects, respect actuation and safety limits, and remain predictable when contact persists -- objectives in tension for any fixed-gain controller. A sustained contact torque $τ_{\text{ext}}$ through a joint stiffness $K_d$ produces the structural bias $e_\infty=τ_{\text{ext}}/K_d$, so stiffening for accuracy sacrifices contact safety while softening yields by design. We make these interaction dynamics explicit and actuator-agnostic through a constant-$A_d$ double-integrator backbone, instantiating the offset-free architecture established for physical human-robot interaction (pHRI) and preserving its modeling assumptions on the reduced residual dynamics. An algebraic feedforward reduces the tendon transmission -- hydraulic, cable, pneumatic, twisted-string, or series-elastic -- to a constant-coefficient double integrator, so the QP cost inverse is precomputed offline and a 10-step receding-horizon QP runs at 500,Hz under contact-force (ISO/TS 15066), actuation, and jerk constraints. An encoder-only augmented-Kalman disturbance state drives steady-state error to zero under constant contact loads in the nominal detectable case. In simulation, a hydraulically actuated finger -- the worked example, adding pressure and cavitation constraints -- attains 0.6,mrad RMS, 0.1,mrad steady-state, and 7.3,mrad peak deflection under 1.5,Nm contact: 153$\times$, 1500$\times$, and 21$\times$ better than classical impedance. The realized first-move stiffness (18$\to$323,Nm/rad with update rate) is independently verified, and the architecture scales to a 16-DOF LEAP Hand MuJoCo model, recovering from 2.5,N grasp disturbances within 0.7,s.