Organizations: School of Automation and Intelligent Sensing, Institute of Medical Robotics, Shanghai Jiao Tong University, Shanghai 200240, China · School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing, China · 3State Key Laboratory of Advanced Rail Autonomous Operation and School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing 100044, China
Abstract
Dense metric depth prediction from cameras and millimeter-wave radar offers a cost-effective sensing solution for autonomous systems. However, radar measurements are inherently sparse and susceptible to clutter, multipath reflections, and projection errors. While aggregating multiple radar frames provides denser metric cues, it also introduces temporal misalignment and dynamic-object interference. Directly propagating such unreliable measurements can therefore corrupt large regions of the predicted depth map. To address this issue, we propose RbFT-Net, an end-to-end rectify-before-fuse framework for multi-frame 4D radar-camera depth completion. Rather than assuming accumulated radar returns to be accurate, RbFT-Net treats them as noisy temporal anchor candidates. An image-conditioned rectification module jointly corrects their image-plane locations and metric depths while estimating pointwise reliability. The rectified anchors are then selectively propagated before high-level multi-modal fusion, suppressing the influence of unreliable measurements. Experiments on ZJU-4DRadarCam and a newly collected 4D radar-camera-LiDAR dataset show that RbFT-Net consistently outperforms the evaluated independent radar-camera methods and remains competitive with plug-in pipelines using auxiliary monocular depth models. Cross-platform evaluation and component analyses further support the effectiveness of the proposed rectification and reliability-aware propagation strategy.
Accurate yet low-latency depth is essential for radar-camera perception in autonomous systems. Cameras provide rich appearance but lack metric scale, whereas automotive radar offers metric range but is sparse and noisy. Many pipelines are multi-stage or depend on auxiliary annotations, increasing latency and limiting portability. We introduce JustDepth, a single-stage radar-camera depth estimator trained only with radar, camera, and single-scan LiDAR. All radar returns are aggregated into a fixed-width 1D representation, decoupling runtime from point count. A Height Fusion Block fuses modalities, a lightweight GNN propagates depth globally, and a training-only confidence decoder stabilizes learning with zero test-time cost. We mitigate stripe artifacts via simple augmentations and quantify them using the Vertical-Horizontal Gradient Ratio (VHGR). On nuScenes, compared to recent state-of-the-art methods, JustDepth maintains accuracy while reducing inference time by 39.7x and stripe artifacts by 66% as measured by VHGR.
Radar-camera depth estimation must turn an ultra-sparse, all-weather, metric radar signal into a dense per-pixel depth map. Existing methods -- concatenation, confidence-aware gating, sparse supervision, graph-based extraction -- combine radar and image features outside the backbone's sequence operator, and even cross-modal Mamba variants leave the selection mechanism itself unimodal. We argue that the selection mechanism is the right place for radar to enter. We introduce Radar-Modulated Selection (RMS), a minimal and principled way to inject radar into Mamba's selective scan: radar modulates the scan from within, adding zero-initialised perturbations to the step size Δ and readout C while leaving the input projection B and state dynamics A image-only. The construction is exactly equivalent to a pretrained image-only Mamba at initialisation, ensuring radar only influences the model where it improves accuracy. Two further properties follow that out-of-scan fusion cannot offer: linear-cost cross-modal coupling at every recurrence step, and a natural fallback to the image-only backbone when radar is absent. We deploy RMS in a Multi-View Scan Pyramid (MVSP) that matches the fusion operator to radar's spatial reach at each scale. SemoDepth achieves state-of-the-art performance on nuScenes, reducing MAE by 34.0%, 29.9%, and 29.9% over the previous best at 0--50, 0--70, and 0--80m, while attaining the lowest single-frame latency (26.8ms). A further ablation shows that out-of-scan feature blending adds no accuracy on top of RMS, providing empirical validation that in-scan selection can replace out-of-scan fusion.
Dense 3D depth perception fails under smoke, fog, and darkness because optical sensors cannot penetrate airborne particulates. mmWave radar remains usable and measures range accurately under these conditions, but its small aperture limits angular resolution. We present GRADE, which grounds a pretrained generative prior in single-frame radar geometry to estimate high-fidelity metric depth. GRADE first maps raw 4D radar spectra to coarse metric depth. A latent diffusion backbone then recovers structural detail while conditioning every denoising step on this estimate. A pixel-space adapter uses residual camera cues when available and is trained across clear, smoke-degraded, and occluded inputs so the full output approaches the radar-conditioned path as visibility degrades. Trained and evaluated on ~95K frames across 12 buildings with real smoke, GRADE achieves an MAE of 0.303 m in clear scenes and 0.313 m under smoke, outperforming existing baselines. Code and datasets are available at https://phi-lab-rice.github.io/GRADE.