Recent advances in teleoperation have enabled robotic manipulators to perform dexterous, human-arm-like motions. However, human operators may fail to avoid suddenly appearing obstacles promptly and effectively, particularly under network latency or limited attention, thereby creating safety risks. To address this issue, we propose a lightweight and modular framework for proactive collision avoidance, operating directly at the end-effector velocity-command level. After preprocessing the point cloud, the framework first predicts potential collisions based on time-to-collision (TTC) with integrated overshoot protection, and subsequently rotates the relative-velocity vector using Rodrigues' rotation formula. The deflection changes only the direction of the relative velocity while preserving its magnitude, thereby mitigating the deadlock problem commonly encountered by conventional artificial potential field (APF) methods. The prediction module compensates for point-cloud processing latency introduced by complex teleoperation pipelines, while the lightweight design enables the high-frequency control required for teleoperation. Simulations across diverse scenarios show that the proposed method achieves a higher end-effector collision avoidance rate than the baseline methods. Experiments on a physical robotic system further validate its collision-avoidance effectiveness.
In teleoperation, the human operator typically controls only the end-effector pose, which often leads to self-collisions of the manipulator and collisions with environmental obstacles, since joints and links are not controlled individually. A common strategy to mitigate this issue is to enhance the operator's input using optimal-control-based trajectory planning. As derivative-based solvers require differentiable constraints, existing approaches either approximate robots and obstacles with spheres, reducing geometric accuracy, or approximate derivatives, degrading convergence and increasing computation times. We address these limitations by adapting a recent formulation of differentiable collision-avoidance constraints, based on duality in convex optimization, to the teleoperation setting. The robot is approximated with capsules and the environment with polytopes. We compare the resulting trajectory planning method against state-of-the-art techniques in simulation with varying numbers of obstacles and evaluate it on a UR5e manipulator in a real-world teleoperation test. Results show that our approach achieves lower computation times while enabling more accurate obstacle modeling, leading to smoother and collision-free end-effector teleoperation.
Robot teleoperation enables safe, non-contact task execution in hazardous environments where direct human access is difficult, and its application has expanded with recent VR technologies. Many VR teleoperation studies, however, have primarily served as data-collection tools for robot imitation learning, so they often do not explicitly address dynamic obstacles, workspace changes, or collision risks during operation. For real deployment aimed at operator safety, teleoperation must react to dynamic situations with low latency and remain robust to mistakes made by inexperienced operators. This paper presents a VR teleoperation framework that supports real-time manipulation while handling collisions with both static and moving obstacles. The framework integrates GPU-accelerated inverse kinematics and trajectory optimization within a VR interface to generate feasible joint commands at each control cycle under robot constraints. Experiments with a 7-DoF manipulator demonstrate stable online behavior and collision-aware motion generation across three scenarios: obstacle-free, static-obstacle, and moving-obstacle environments. The results indicate that the proposed approach generates motion consistent with the operator's command while producing safe detours when obstacles interfere with the commanded path.
Real-time collision avoidance for robotic manipulators requires fast reactions to unexpected obstacle motion and lookahead to avoid becoming trapped by near-future constraints. Full model predictive control can provide this foresight, but its online cost may grow quickly with horizon length, model fidelity, and the number of active geometric constraints. Conversely, horizon-free reactive methods are computationally efficient but can be short-sighted in dynamic clutter. We present a task-space receding-horizon controller that uses a short contact-consistent rollout to generate a terminal kinematic reference satisfying internal non-penetration constraints, then computes only the first input of a smooth minimum-acceleration transition toward that reference. Starting from a closed-loop inverse-kinematics regulation law, the rollout is performed with an iterative dynamics solver operating on inflated convex robot and obstacle geometries, so that robot-obstacle contacts, dynamic obstacle motion, and self-collisions can shape the terminal reference without requiring full constrained trajectory optimization. We analyze the contact-inactive closed loop and show local exponential task-space regulation under standard regularity assumptions. For contacts activated inside the rollout, we characterize the corresponding discrete updates and bound the effect of moving obstacles on regular operating sets. Simulations on a 40-DOF multi-chain system show that intermediate horizons balance anticipation, responsiveness, and computational cost. Hardware experiments on a 6-DOF platform demonstrate consistent sim-to-real behavior without accurate inertial parameter estimation, and comparisons against dynamic optimization fabrics and model predictive control (MPC) baselines show improved success rates in dynamic clutter while preserving solve times compatible with real-time execution in the tested regimes.