Real-time Estimator of Actuator Control and Health (REACH) on an Eel-Inspired Soft Robot

This paper presents the application and experimental evaluation of a systematic method for optimal sensor placement in soft robots. Existing methods either lack generalizability across different soft robot morphologies or do not account for system dynamics. The applied method uses convex optimization to find the optimal sensor configuration that maximizes an observability Gramian-based metric. The framework is experimentally evaluated using position and strain measurements on a soft continuum arm. Kalman filter state estimates using optimal sensor placements yield lower reconstruction error than a baseline across all sinusoidal input trials, with improvements on the order of millimeters. This case study shows that linear control theory tools can guide optimal sensor placement in soft robots, suggesting an interpretable approach to sensor placement that may extend to other morphologies.

Soft robots are valuable robophysical platforms for studying body-caudal undulatory locomotion, but their compliant bodies are difficult to control precisely under changing hydrodynamic loading. Conventional proportional-integral-derivative (PID) feedback stabilizes periodic undulation in static water, but can accumulate flow-dependent tracking delay and increasing inter-trial variability when environmental flow becomes non-trivial. Here, we evaluate whether augmenting PID control with a Linear Repetitive Learning Estimation Scheme (PID-LRLES) recovers tracking accuracy and repeatability under dynamic flow. The LRLES generalizes classical integral action from constant to periodic, non-constant references, while using a stable transfer-function realization whose poles have negative real parts to avoid the long-term instability issues of classical repetitive control. Closed-loop experiments were carried out in a recirculating flow tank at five bulk flow speeds spanning 0 to 32.6 cm s^-1, using an embedded soft capacitive bending sensor at a 1 kHz control-loop rate. With controller gains tuned once in static water and then held fixed across all conditions, PID-LRLES tracked the periodic bending-envelope reference more closely than the PID baseline and significantly reduced the inter-trial spread of the per-trial RMSE (paired Wilcoxon signed-rank test, p = 1.8 x 10^-4, n = 25). Embedded soft proprioception and cycle-to-cycle learning act as complementary contributors to robustness: the sensor exposes the periodic hydrodynamic bias in body deformation, while the learning term absorbs it over recent oscillation cycles. By reducing flow-dependent control-induced variability, the approach provides an enabling layer for future robophysical studies seeking to isolate the effects of morphology, sensing, and environmental flow on aquatic locomotion.

Jellyfish-inspired robots offer a compliant and efficient approach to underwater locomotion, but achieving large deformation together with repeatable actuation and closed-loop control remains challenging. In this work, we present a tendon-driven robotic jellyfish with constrained soft actuation. Each actuator combines a flexible substrate with discrete constraints, enabling bending up to $150^\circ$ with an approximately linear tendon displacement-bending relationship. Eight actuators driven by four servos allow the robot to perform stable swimming, attitude adjustment, and self-righting. Based on the linear actuation, a reinforcement-learning controller is further developed, enabling closed-loop depth regulation in both simulation and physical experiments. These results show that mechanical constraints can improve the controllability of soft actuation while preserving compliant jellyfish-like motion, providing a route toward manoeuvrable and autonomous jellyfish robots.