cs.ROAug 27, 2026

Remote Human-Robot Interaction In Greenhouses via Virtual Reality: How Plant Canopy Structure Affects Leaf Disease and Soil Moisture Inspection

Authors: Daniel Udekwe, Hasan Seyyedhasani

Organizations: School of Plant and Environmental Science, Virginia Tech, Blacksburg VA, USA

Abstract

This study evaluates the effectiveness of remote human-robot interaction using virtual reality for leaf inspection and soil moisture assessment in a greenhouse environment. The robotic system comprised an unmanned ground vehicle and a robotic manipulator equipped with cameras, governed by kinematic models for navigation and manipulator control. Fourteen distinct plants were inspected across two experiments utilizing VR teleoperation, guided by a set of pre-specified research questions and hypotheses. In the leaf inspection experiments, cycle completion times varied from 3.3 to 8.0 s, and plant-based disease detection was achieved up to 88% accuracy; diseased-spot detection improved numerically in the second experiment, though this change was not statistically significant (p=0.378). For soil moisture assessment, the experiments achieved successful determination of watering needs in up to 64.3% of plants (9 of 14), with consistent success observed for plants 1, 2, 3, 8, 9, 10, and 13; however, this improvement was likewise not statistically significant (p=0.50). A post hoc analysis instead revealed that soil moisture assessment reliability was strongly and significantly predicted by plant canopy morphology (p<0.01): plants with broad, single-leaf canopies reached 100% success by the second experiment, versus only 16.7% for dense, compound canopies. A secondary analysis showed operators became measurably faster at attempting dense-canopy plants without a corresponding gain in success, indicating that camera occlusion, not operator skill or effort, is the dominant limiting factor. These findings show occlusion imposes a sensing limitation rather than a control or training deficiency, and that adapting camera viewpoint and sensing strategy to canopy density is needed to improve the system's accuracy and robustness.

Explore similar work

Jan 18, 2025

RoMu4o: A Robotic Manipulation Unit For Orchard Operations Automating Proximal Hyperspectral Leaf Sensing

Driven by the need to address labor shortages and meet the demands of a rapidly growing population, robotic automation has become a critical component in precision agriculture. Leaf-level hyperspectral spectroscopy is shown to be a powerful tool for phenotyping, monitoring crop health, identifying essential nutrients within plants as well as detecting diseases and water stress. This work introduces RoMu4o, a robotic manipulation unit for orchard operations offering an automated solution for proximal hyperspectral leaf sensing. This ground robot is equipped with a 6DOF robotic arm and vision system for real-time deep learning-based image processing and motion planning. We developed robust perception and manipulation pipelines that enable the robot to successfully grasp target leaves and perform spectroscopy. These frameworks operate synergistically to identify and extract the 3D structure of leaves from an observed batch of foliage, propose 6D poses, and generate collision-free constraint-aware paths for precise leaf manipulation. The end-effector of the arm features a compact design that integrates an independent lighting source with a hyperspectral sensor, enabling high-fidelity data acquisition while streamlining the calibration process for accurate measurements. Our ground robot is engineered to operate in unstructured orchard environments. However, the performance of the system is evaluated in both indoor and outdoor plant models. The system demonstrated reliable performance for 1-LPB hyperspectral sampling, achieving 95% success rate in lab trials and 79% in field trials. Field experiments revealed an overall success rate of 70% for autonomous leaf grasping and hyperspectral measurement in a pistachio orchard.
Jan 17, 2026

Visual-Language-Guided Task Planning for Horticultural Robots

Crop monitoring is essential for precision agriculture, but current systems lack high-level reasoning. We introduce a novel, modular framework that uses a Vision Language Model (VLM) to guide robotic task planning by actively querying heterogeneous data sources, including enriched RGB camera feeds and 2D semantic occupancy maps, interleaved with robotic action primitives. We contribute a comprehensive benchmark for short- and long-horizon crop monitoring tasks in monoculture and polyculture environments. Our results show that while zero-shot VLMs perform robustly for short-horizon tasks (achieving 87% success, comparable to human experts), success drops significantly to under 10% for complex long-horizon, multi-target tasks. Despite this decline, task completion rates remain above 76% under noiseless conditions. Critically, the system degrades when relying on noisy semantic maps, demonstrating a key limitation in current VLM context grounding for sustained robotic operations. This work offers a deployable framework and critical insights into VLM capabilities and shortcomings for complex agricultural robotics.
Oct 13, 2026

MARTS: A Modular Agricultural Robot for Targeted Spraying of Diseased Tomato Plants in Greenhouses

Broadcast spraying remains the dominant method of disease control in greenhouse tomato production, yet it treats healthy and diseased tissue alike, exposes workers to hazardous aerosols, and depends on operator skill. This paper presents MARTS (Modular Agricultural Robot for Targeted Spraying), a low-cost robotic platform that closes the loop from plant-level disease detection to leaf-localised spray delivery in commercial greenhouses. MARTS integrates a Clearpath Husky A200 mobile base, a UR5 manipulator, a novel modular spraying end-effector built around a single 12 V micro-diaphragm pump, and a wrist-mounted Intel RealSense D435 RGB-D camera. Disease detection reuses our previously published Tomato Leaf Disease Vision Language Model (TLDVLM; Grounding DINO, SAM-2 and LoRA-tuned BLIP-2, 97.27% accuracy over 10 classes); this work focuses on actuation, control and system integration. A ROS pipeline lifts detections into 3D targets, generates collision-aware nozzle poses at a 120 mm stand-off using fitted leaf normals, and scales pump pulse duration to lesion area. Water-sensitive paper calibration showed a linear pulse-volume relationship (R^2 = 0.994). In MuJoCo simulation, an adaptive base-repositioning strategy achieved 100% coverage of 18 waypoints with a maximum orientation error of 1.1 deg. Deployed at the SILAL commercial greenhouse (Al Ain, UAE) on cherry tomatoes under natural infection, MARTS treated 312 diseased leaves in 12 autonomous trials with 92.4% targeting success, 18.7 mm mean spray-centre error, 6.1% adjacent-leaf overspray, and a 71% reduction in pesticide volume versus broadcast spraying. Mean cycle time was 4.8 s per leaf, and the spraying subsystem costs USD 412, 6-10x lower than comparable systems, showing that accurate leaf-level targeting is achievable on commodity hardware.