GeoFF3D: Coordinate-Anchored Feed-Forward Reconstruction for Large-Scale UAV Mapping
Authors: Xiang Yang, Yongli Wang, Yunsheng Zhang, Jun Li, Hao Chen, Haifeng Li
Organizations: School of Geosciences and Info-Physics, Central South University, Changsha, China · Hunan Engineering Research Center of 3D Real Scene Construction and Application Technology, Changsha, China · College of Electronic Science and Technology, National University of Defense Technology, Changsha, China
Existing feed-forward 3D reconstruction methods typically process a bounded number of images and recover cameras and geometry in local or internally normalized frames. Extending them to large-scale UAV mapping requires scalable multi-chunk processing and reliable aggregation, while full Sim(3) alignment can become unstable for near collinear trajectories. We present GeoFF3D, which combines a coordinate-anchored model with a spatial large-scale reconstruction framework (SLRF). The model uses georeferenced camera translations and optional geometric priors to predict camera poses and dense point maps directly in a gravity-aligned Z-up metric frame. SLRF partitions images into spatially overlapping chunks, propagates shared-view priors, and aggregates local reconstructions hierarchically, while remaining applicable to different bounded-view models. Across nine aerial mapping blocks, GeoFF3D achieves the best average reconstruction quality, improving F@5 from 0.829 for Pi3X + SLRF to 0.877. On long UAVScenes sequences, it reaches 0.848, compared with 0.687 for Pi3X + SLRF and 0.451 for the strongest evaluated SLAM/streaming baseline. GeoFF3D reconstructs 2,000 images in approximately five minutes, demonstrating scalable and robust large-scale UAV reconstruction.The code is available at https://github.com/yanxian-ll/GeoFF3D.
While feed-forward 3D reconstruction (3R) offers efficient end-to-end modeling, its application in large-scale UAV mapping is hindered by the prohibitive memory cost of Transformer attention. Current scalable streaming 3R methods assume temporally and spatially continuous inputs, rendering them ineffective for the weakly ordered or unordered image streams common in cross-strip UAV operations. To address this, we propose On-the-Fly3R, a training-free, progressive online 3D reconstruction framework for large-scale UAV images that upgrades various 3R backbones for large-scale UAV scenarios. Our method enables reconstruction from unordered inputs via retrieval-guided dynamic subset construction, which adaptively selects spatially relevant images. To further improve the robustness, a validation-rejection-retry mechanism is designed to guarantee global consistency, performing a pre-integration consistency check and automatically rejecting misaligned images and retrying with alternative subset. Finally, inspired by VSLAM, pose graph optimization based on the retrieval loop closure is employed to mitigate camera drift. Evaluations on several UAV benchmarks show that our On-the-Fly3R successfully scales various 3R models to over 5,000 images across square-kilometer UAV scenes, delivering substantially superior accuracy compared to several SOTA streaming 3R methods. Code is available at https://github.com/Sh1nZzz/On_the_Fly3R
Feed-forward 3D reconstruction has advanced rapidly, but current models remain unreliable in UAV photogrammetric acquisition. We argue that this failure is caused not only by appearance-domain shift, but also by UAV-specific camera-geometry variations, especially oblique views and HFOV-height ambiguity. Existing UAV datasets mainly emphasize scene diversity and provide limited coverage of camera configurations, which restricts robustness evaluation and UAV-domain adaptation. To address this gap, we introduce UAVFF3D, a geometry-aware real-synthetic benchmark for feed-forward UAV 3D reconstruction. UAVFF3D contains more than 170k real UAV images and more than 370k synthetic images rendered from high-quality textured 3D models, covering diverse HFOVs, flight altitudes, viewing directions, and acquisition patterns. It also includes a controlled HFOV-height test subset for diagnosing projection-geometry ambiguity. We further propose an evaluation protocol that jointly assesses camera-geometry estimation and dense scene reconstruction under a shared global alignment, avoiding the bias caused by separate camera and geometry alignments. Experiments on representative feed-forward reconstruction models show that UAVFF3D-based domain adaptation consistently improves camera and geometry estimation, reducing Ray Error by up to 84.2%, Pose ATE by up to 76.0%, and Chamfer Distance by up to 41.1%. In oblique scenes, adaptation reduces the oblique-nadir rotation gap by up to 90.7%. Under HFOV-height ambiguity, it improves robustness across HFOV-height configurations and yields more stable performance across HFOV settings. Incorporating camera priors further improves reconstruction under UAV-specific acquisition geometries. The dataset and evaluation code are available at https://github.com/yanxian-ll/UAVFF3D .
Modern feed-forward 3D reconstruction methods like VGGT predict pixel-aligned pointmaps in camera-centric coordinate frames. However, this choice of coordinate frame is not always optimal. We propose instead to predict pointmaps in upright, gravity-aligned frames that exploit strong structural cues present in many real-world scenes. Unlike camera-centric frames, gravity-aligned frames share a common vertical axis across viewpoints, reducing the rotational degrees of freedom needed to relate pointmaps to one another. To this end, we introduce the Gravity Grounded Geometry Transformer (G3T), fine-tuned from existing models on gravity-aligned 3D data. G3T produces highly accurate gravity-aware predictions, including upright pointmaps and camera-to-gravity poses. We further introduce G3T-Long, a submap-based incremental 3D reconstruction pipeline that leverages the reduced rotational degrees of freedom afforded by upright frames to achieve significantly improved reconstruction accuracy.