Generalizing HVAC Control With Domain Randomized Reinforcement Learning

Buildings account for roughly one-third of global energy consumption and CO$_2$ emissions. Optimizing indoor climate systems plays a critical role for urban climate mitigation aligned with UN Sustainable Development Goals 11 and 13. However, indoor delayed thermodynamic responses and partial observability severely hinder existing methods, which are primarily limited by implicit thermal inertia, occupancy dynamic prediction, and cumulative prediction errors, especially for out-of-distribution environments. In practice, these challenges are further exacerbated by the high cost and privacy burden of dense indoor sensing, forcing operators to collect only limited data in a single operating regime while expecting controllers to generalize reliably across unseen seasons and climate regions. To address this problem, we propose ADAPT, a physics-aware conditional diffusion indoor environmental world model for HVAC control. The model predicts a short-horizon held-action thermal baseline to capture the latent thermal inertia of the buildings. The diffusion backbone utilizes the robustness of generative models, while a learnable multi-zone heat-balance regularizer constrains generated trajectories to satisfy transferable building thermodynamics without requiring known building geometry or manually calibrated thermal parameters. A credit assignment is then design for the downstream reinforcement learning. Extensive experiments on SemibuildingSim and Sinergym demonstrate that ADAPT reduces HVAC energy consumption by 7.3% and occupant discomfort by 30.2% compared with state-of-the-art baselines under IID control. Under OOD control scenarios spanning unseen seasons and climate regions, ADAPT maintains robust performance with only marginal degradation relative to its IID performance, substantially outperforming existing methods in transfer robustness.

Multi-zone variable-air-volume control must balance thermal comfort, indoor air quality, and electricity use across several continuous actuators. Model predictive control and reinforcement learning are widely studied, but deployment typically requires building-specific modeling or training, limiting scalability. We first test whether a frontier reasoning model (an LLM trained to use additional inference-time computation) can achieve competitive VAV control from text without building-specific training. With that capability established, we then test whether TD3-guided reinforcement fine-tuning (RFT) can transfer control knowledge into a locally deployable open-weight model. Five controllers are evaluated over three summer days in a physics-based four-zone emulator. Relative to a Guideline 36-based baseline, TD3 reduced HVAC electricity by 4.5% while improving temperature and CO$_2$ compliance. Without building-specific training, GPT-5 achieved the largest reduction (6.2%) but reduced the ventilation margin. For RFT, deterministic rollouts restore a saved state, apply one candidate, and follow TD3 to score each action. Auditing a learned critic against these rollouts exposed a failure hidden by its near-perfect across-time correlation ($r=0.9998$): within-state ranking was unreliable; the critic selected the rollout-best candidate in only 5 of 10 states. Even with the rollout verifier, 200 RFT steps produced no sustained improvement in sampled-action return; the open-weight controller used more electricity than the baseline before and after training, and its five-minute predictions remained worse than persistence. GPT-5 predicted transitions far better. Exact rollout scores rank sampled actions but reveal neither next-state effects nor an improvement direction. The unchanged transition errors motivate transition-focused supervised fine-tuning before value-based RFT.

Reinforcement learning (RL) has achieved strong results in control, yet learned policies remain brittle to changes in dynamics, action spaces, observation spaces, or goals, a critical limitation for real-world deployment. Existing benchmarks offer limited diversity and complexity, making it difficult to rigorously study transfer, multi-task learning, and meta-learning in RL. We introduce Building2Building (B2B), a large-scale suite of realistic Heating, Ventilation, and Air Conditioning (HVAC) control environments built on EnergyPlus, a state-of-the-art building simulator. B2B is fully compatible with the Gymnasium interface and features a parametric building generator, enabling the systematic generation of diverse building configurations with heterogeneous observation and action spaces. Based on this suite, we define benchmark tasks targeting key open challenges in RL, including goal adaptation, dynamics adaptation, action-space shifts, and cross-domain transfer. By providing a large-scale, diverse, and physically grounded testbed with standardized evaluation protocols, B2B enables systematic investigation of generalization and transfer in continuous control. Beyond advancing research on generalization in RL, this new benchmark also carries significant societal implications by enabling improved HVAC control at scale, one of the most energy-intensive systems in buildings.