Smartphone GNSS Booster: Centimeter-Level Pedestrian Positioning Using a Portable Signal Re-Radiator

Global Navigation Satellite System (GNSS) navigation is widely used to provide absolute, outdoor positioning in field robotics. Advances in Real-Time Kinematic (RTK) technology can achieve centimeter-level accuracy, facilitating autonomous navigation tasks. However, the cost and extra infrastructure used for RTK still hinder the application and more cost-effective solutions are desired. In this letter, we present a novel tightly-coupled state estimation framework that achieves high-precision localization by using low-cost, mass-market single-frequency GNSS receivers with any relative motion sensors (e.g., wheel encoder, camera, LiDAR). We propose a sliding-window factor graph that integrates generic relative motion with global epoch-to-anchor constraints derived from continuous carrier phase tracking. To eliminate the reliance on physical base stations, we introduce a virtual anchor mechanism: upon the initial observation of a satellite, its state is locked as a virtual reference to establish global epoch-to-anchor constraints. By substituting multi-frequency hardware redundancy with single-frequency multi-modal kinematic priors and a robust cycle-slip recovery technique, our approach ensures carrier-phase integrity on cheap receivers. Extensive real-world experiments on heterogeneous low-cost sensor suites validate that our method improves the accuracy of a single-frequency receiver from several meters to decimeter-level precision across diverse environments, providing an accurate, cost-effective and reliable alternative for autonomous navigation.

Global navigation satellite system (GNSS) interference poses a serious threat to reliable positioning, especially in indoor and multipath-rich environments where source localization is highly challenging. In this paper, we formulate GNSS interference localization as an active sensing problem and propose a reinforcement learning (RL) framework in which an agent sequentially explores the environment to infer the position of an emitter source from radio frequency (RF) observations acquired with a 2x2 patch antenna. The localization task is modeled as a partially observable decision process, since single-snapshot measurements are often ambiguous under multipath propagation and changing channel conditions. To address this, the proposed framework combines high-dimensional RF sensing with deep RL and recurrent policy learning. We investigate both value-based and policy-based approaches, namely Deep Q-Networks (DQN) and Proximal Policy Optimization (PPO), and study their behavior under domain shift. The approach is evaluated on a simulated dataset generated with the Sionna ray-tracing module, which provides realistic propagation effects and diverse environment configurations. Experimental results show that the proposed method achieves a localization success rate of 80.1, demonstrating the potential of RL for adaptive GNSS interference localization. Overall, the results highlight simulation-assisted training as a promising direction for robust interference localization in challenging propagation environments.

In Global Navigation Satellite System (GNSS)-degraded environments, pseudolites (PLs) provide additional signal sources to enhance positioning performance, but their integration in optimization-based frameworks remains limited. This paper presents a loosely coupled factor graph optimization (FGO) framework that fuses the GNSS/PL least-squares (LS) solutions with inertial measurement unit (IMU) data. The evaluation considers low GNSS visibility scenarios with four high-elevation GNSS satellites and up to two PL transmitters over an 80~s window. FGO achieves a 22.8% to 41.3% reduction in mean 3D error compared to standard LS methods. Compared to a GNSS-IMU baseline, incorporating PL transmitters further improves positioning accuracy, with performance depending on geometry.