Reliable perception is essential for underwater vehicles operating in complex environments, where light attenuation and scattering often degrade visibility and compromise optical sensing. Forward-looking sonar (FLS) offers an alternative by providing high-frame-rate acoustic imaging under poor optical conditions. However, real-time FLS mapping remains challenging due to unresolved target elevation, spatially non-uniform noise, and fragmented target boundaries, which hinder feature extraction and introduce geometric ambiguity during projection. To address these challenges, we propose a cascaded feature reconstruction pipeline combining fast Fourier transform (FFT)-based denoising, fast multiscale constant false alarm rate (MCFAR) detection, and gradient-adaptive boundary connection to extract geometric features from degraded sonar images with low latency. We integrate attitude-aware geometric projection with incremental occupancy accumulation to construct a depth-referenced 2.5D map for local mapping in confined underwater environments. The sonar's vertical position is referenced to an external sensor, while target elevation is assigned under an explicit geometric assumption rather than measured directly by FLS. Experiments in a 3 m X 5 m pool demonstrate centimeter-scale planar mapping accuracy, with a root-mean-square error (RMSE) below 3 cm across three sequences and an average processing time of 42.4 ms per frame.
Reliable navigation in underwater environments remains a key challenge in marine robotics. In such scenarios, forward-looking sonars are a natural choice for long-range perception, offering wide coverage even in turbid, low-visibility conditions. However, sonar images are inherently noisy, contain artifacts, and lack rich semantic structure, causing standard computer vision methods for keypoint detection and matching to perform poorly. In this paper, we introduce ISOPoT, an imaging sonar odometry method based on modern point tracking techniques. We propose a sonar odometry pipeline that uses multi-frame point tracks as its primary correspondence representation, augmented with lightweight optimizations to improve robustness. We evaluated the proposed method on the Aracati 2017 dataset, as well as on an internal sonar dataset collected in real-world underwater environments. Our results show that ISOPoT outperforms previous state-of-the-art methods consistently in both sonar-only scenarios and in multi-sensor settings.
Accurate seabed mapping is essential for habitat monitoring and infrastructure inspection. In turbid, shallow coastal waters, such as shellfish aquaculture farms, the effectiveness of traditional optical methods is limited. Autonomous surface vehicles (ASVs) equipped with forward-looking sonar (FLS) offer a promising alternative. However, existing sonar-based systems face challenges in achieving fine resolution mapping over long trajectories due to low-resolution positioning measurements and accumulated drift over long trajectories. In this paper, we present a drift-resilient seabed mapping framework that integrates local FLS frame alignment using the Fourier-Mellin transform (FMT) with global trajectory optimization based on an extended Kalman filter (EKF) that fuses global positioning system (GPS), inertial measurement unit (IMU), and compass data. A variance-based image blending strategy is used to further reduce visual artifacts in overlapping regions. Field trials on a structured oyster farm site show that our framework helps reduce drift in RMSE by 9.5% relative to the FMT-only baseline. This framework also enables sub-meter reconstruction accuracy and preservation of high-resolution textures needed for oyster inventory estimation within the mapped areas.
Autonomous underwater navigation typically relies on complex and expensive multi-modal sensor suites designed to prioritize global Simultaneous Localization and Mapping (SLAM) accuracy. However, local reactive behaviors such as coarse navigation and obstacle avoidance require only local consistency---a capability that should be feasible using only a Forward-Looking Sonar (FLS), yet remains largely unaddressed, leaving a critical gap in FLS-only local SLAM. Moreover, existing acoustic SLAM frameworks predominantly rely on sparse feature extraction methods that discard substantial portions of the already information-sparse acoustic returns. To overcome these limitations, this work introduces a dense direct registration approach that aligns full acoustic intensity scans to a recursively updated local map. Real-time execution is achieved via an Inverse Compositional Gauss-Newton optimization strategy that minimizes computational overhead. Experimental evaluations show that this dense method yields significant improvements on translation error compared to sparse keypoint baselines, maintaining stable sub-meter tracking precision over wide displacement gaps. Moreover, this approach delivers odometry performance comparable to multi-sensor fusion pipelines (FLS, DVL, and IMU), bypassing expensive payload dependencies in feature-rich environments. We validate real-world applicability through AUV field trials, running the full local SLAM approach onboard an embedded, resource-constrained computer.