Human demonstrations offer a scalable way to collect manipulation data, but their contacts may be unstable or infeasible when transferred to a robot hand. Collecting demonstrations directly on the target robot avoids this mismatch but substantially increases the cost of data collection. To address this trade-off, we present Touch2Robot, a framework that lets humans collect demonstrations while seeing how the target robot hand would contact the object. We capture human hand motion, tactile-glove measurements, and object motion during human manipulation. These recordings guide object-specific RL policies to reproduce the demonstrated object motion while favoring contacts consistent with the recorded human touch. We distill the learned behaviors into a unified real-time retargeter that maps incoming human observations and object geometry to robot hand configurations. During collection, the predicted robot configuration is synchronized with the tracked object pose in simulation to reconstruct robot-object contacts, which are visualized to help the demonstrator adapt subsequent interactions to the target hand. Across four real-world tasks, Touch2Robot improves average real-robot replay completion from 37.9% to 72.1% over visual-only feedback, while reducing the collection time per replay-successful demonstration from 58.6s to 18.2s. Reconstructed target-hand contacts achieve 44.2% F1 against real-robot tactile measurements, and policies trained on Touch2Robot demonstrations improve downstream Diffusion Policy performance by 29.1 percentage points over visual-only feedback. These results show that bringing robot touch into the human demonstration loop improves both the quality and efficiency of scalable dexterous data collection. Project webpage: https://Touch2Robot.github.io/.
Learning dexterous manipulation from demonstrations is bottlenecked by data: the contact forces that determine whether a grasp succeeds are absent from every scalable source of human demonstrations. This paper builds on two observations. First, what survives the change from a human hand to a robot hand is the contact structure of a demonstration - which finger regions touch which object locations, and in what order - rather than its joint motion. Second, physical consistency need not be engineered per task: a single residual reinforcement learning (RL) policy, trained once across diverse demonstrations, can repair kinematic recordings into physically consistent, contact-annotated trajectories, and the same residual formulation restores dynamic feasibility after retargeting. These observations yield a three-stage pipeline that converts human motion-capture recordings into dexterous robot policies with no real-robot training data: physics refinement with a simulated MANO hand recovers contacts and forces, contact-anchored retargeting transfers the demonstrated contact structure through an objective independent of hand morphology, and residual policy learning adapts the result to robot actuation. The pipeline reconstructs 25,454 single-hand trajectories (success 7.3% -> 59.3%) and 25 dual-hand tasks (16.0% -> 62.4%) with one shared policy per setting, transfers one human dataset to four morphologically distinct robot hands (+62.4 pp), and executes four contact-rich bimanual tasks on physical hardware with zero real-robot training data.
Dexterous manipulation with multi-fingered robot hands promises human-level dexterity, but collecting large-scale dexterous robot hand data remains difficult. Learning from human demonstrations has emerged as a scalable alternative to robot teleoperation, providing strong priors on object interaction and contact strategies. Recent sim-to-real RL methods incorporate such priors, but often (i) omit rewards that explicitly incentivize precise contact, yielding weak real-world performance, and/or (ii) generalize poorly to unseen object instances. We propose DemoMimic (Dexterous Motion Mimic), a policy that manipulates objects by focusing on their geometry local to the contact points. Its contact-centric rewards encourage precise contact and improve sim-to-real consistency, yielding a single real-world policy that transfers across objects of varying shape, scale, mass, and friction wherever local contact structure is preserved. Real-world ablations show that DemoMimic achieves 71% success across 16 objects, four tasks, and two robot-hand embodiments, with the smallest sim-to-real drop compared to baselines.
Robot learning increasingly depends on broad and diverse demonstrations, yet collecting robot data remains expensive and poorly suited to covering the long tail of real-world tasks. To address this bottleneck, we introduce RoboTok, an internet-scale data engine that, given a query human manipulation video, retrieves manipulation-relevant human demonstrations from web videos for training dexterous robot policies. Specifically, we learn a latent motion space from 3D hand trajectories expressed in estimated actor-centered reference frames. This representation enables manipulation behaviors to be compared across variations in camera viewpoint, scene appearance, and actor occlusions, while remaining compact enough for efficient search and continual indexing over internet-scale video collections. We evaluate RoboTok against existing robot-data retrieval approaches on retrieval benchmarks and downstream robot policy performance. Our results show that RoboTok retrieves more relevant manipulation demonstrations and improves downstream task success, establishing hand-pose trajectory-aware retrieval as a way to make web video a scalable and continuously growing source of supervision for robot learning.