cs.ROSep 24, 2026

TinyCVIO: A Constellation-Aided Visual-Inertial Odometry System for Nanodrones

Authors: Derin Ozturk, Kaan Akan, Irwin Wang, Christopher Batten

Organizations: Department of ECE, Cornell University, Ithaca, NY, USA

Abstract

Nanodrones require accurate, real-time state estimation under severe sensing and computational constraints. We present TinyCVIO, a visual-inertial odometry system that co-designs miniature sensing, visual processing, and estimation for a commodity dual-core microcontroller with 520 kB SRAM. Lightweight LED constellations provide known geometry without surveyed positions or yaw angles, assuming placement on a common level plane. A streaming visual frontend tracks LED observations from a millimeter-scale camera at 29.2 FPS, while a rigid-board measurement model retains inter-LED constraints and streaming QR bounds estimation workspace for a fixed filter-state size. Across 19 hand-held hardware-in-the-loop datasets, the rigid-board model reduces mean absolute trajectory error by 27% relative to planar points. The complete system runs onboard a Crazyflie across nine flights at three speeds, achieving 3.5-3.7 cm mean absolute trajectory error and 0.50-0.60% relative pose error over 10 m segments, with mean estimate latency of 15.7-16.3 ms.

Figures & tables

Explore similar work

Sep 15, 2026

TIO-Former: Ultra-Lightweight 6-Directional ToF-Inertial Odometry for Nano-UAVs via a Streaming Causal Transformer

Autonomous nano-UAV navigation requires accurate ego-motion estimation under stringent size, weight, power, and computing (SWaP-C) constraints, where visual sensors and LiDARs exceed payload limits, optical flow degrades in low-texture scenes, and inertial-only state estimation is susceptible to accumulated drift. While multi-zone time-of-flight (ToF) arrays provide a lightweight metric complement, 6-DoF estimation from merely 384 ranges per frame is challenged by invalid returns, anisotropic observability, and temporal computational scaling. We propose TIO-FORMER, a camera-free, optical-flow-free, and mapless range-inertial odometry framework driven by an IMU and an ultra-lightweight (15 g) payload of six orthogonal 8 x 8 ToF arrays. Our frontend pairs consecutive range grids with a bilateral gated difference, while IMU-guided cross-attention dynamically routes directional features conditioned on platform kinematics. A Streaming Causal Transformer couples an uncompressed Local KV cache with compressed Chunk-FIFO memory, maintaining bounded inference cost and memory footprint independent of flight duration. In real-flight evaluations, TIO-FORMER reduces open-loop position error by 54.4% compared to nano-UAV optical flow and by 66.4%-89.1% over learned inertial baselines. We also evaluate performance across multiple environments and robustness under severe sensing degradation. Deployed on an edge RISC-V companion computer, TIO-FORMER achieves a P95 latency of 10.466 ms and peak resident memory of 6.324 MiB (less than 5 percent system RAM), demonstrating that sparse range sensing provides practical geometric anchoring for resource-constrained micro-aerial robots. Code is available at https://github.com/Ly041021/TIO-Former.
May 19, 2026

Minimalist Visual Inertial Odometry

Visual-Inertial Odometry(VIO), which is critical to mobile robot navigation, uses cameras with a large number of pixels. Capturing and processing camera images requires significant resources. This work presents a minimalist approach to planar odometry, demonstrating that just four visual measurements and an IMU can provide robust motion estimation for differential-drive robots. Our key insight is that four downward-facing photodiodes that sense the world through optical Gabor masks produce signals that encode speed. Based on this, we jointly optimize the mask parameters alongside a Temporal Convolutional Network (TCN) using a physically-grounded simulator. The resulting model decodes speed from just the four measurements produced by the photodiodes. Pairing these estimates with the angular speed from an IMU yields a continuous planar trajectory. We validate our approach with a prototype sensor mounted on a differential drive robot. Across diverse indoor and outdoor terrains, our system closely tracks the reference ground truth without any real-world fine-tuning. Our work shows that minimalist sensing enables efficient and accurate planar odometry.
Oct 7, 2026

Borrowed Eyes: Markerless Nano-UAV Flight with an Active Quadruped Observer

Nano unmanned aerial vehicles (nano-UAVs) can navigate confined spaces that larger robots cannot, but their payload capacity severely limits the sensors and compute available for self-localization in global navigation satellite system (GNSS)-denied environments. We present a vision-based system that localizes a nano-UAV from a quadruped robot with an arm-mounted camera. The quadruped tracks the drone, estimates its position in its own coordinate system using segmentation masks and depth, and transmits that position over a real-time radio link. To ensure continuous tracking, we developed a perception-aware nonlinear Model Predictive Controller (NMPC) that dynamically adjusts the quadruped's body and arm to maximize the drone's visibility, treating observation reliability as a primary control objective. Relying solely on this external estimate, the nano-UAV executed predefined trajectories from takeoff to landing with a median 3D localization error of 59 mm. The system demonstrates robustness against short visual occlusions by smoothly transitioning to onboard inertial flight when line-of-sight is temporarily lost. Ultimately, this framework allows a quadruped to offload the localization burden of a nano-UAV, enabling inspection of complex spaces that neither robot could navigate alone.