Determining Vertical Displacement of Agricultural Areas Using UAV-Photogrammetry and a Heteroscedastic Deep Learning Model

Unmanned aerial vehicle (UAV) photogrammetry is increasingly used in applications requiring high accuracy, such as determining ground surface changes caused by landslides, mining, or microrelief transformation. While acquisition strategies have been widely studied, the influence of the processing workflow-particularly Bundle Block Adjustment parameter settings-remains insufficiently explored. This study addresses this gap through a systematic, full-factorial evaluation of 768 processing variants applied to ten UAV datasets collected over 1.5 years in a 220 ha study area. Eight key parameters were analysed. The results show substantial variability in final 3D accuracy: the best performing variant achieved a root mean square error (RMSE) of 16 mm, whereas the weakest reached 303 mm. The most influential factors were the number of ground control points, the application of additional camera calibration corrections, and the use of the Post-Processing Kinematic GNSS method for determining camera projection center coordinates. The study also evaluates how workflow optimization affects the accuracy of displacement, tilt changes, and horizontal strain determination. While random displacement errors remained stable (RMSE of ~6-7 mm), systematic errors were significantly reduced by over half in all axes, with vertical median absolute error decreasing from 14 mm to 7 mm in the optimized configuration compared to the baseline previously used by the authors. This study provides the first large-scale, practice-oriented assessment of how processing parameter selection shapes the accuracy of both photogrammetric products and deformation indices determination. The results offer actionable guidance for developing more robust and repeatable UAV photogrammetry workflows tailored to high-precision monitoring.

In UAV applications, haze significantly obscures distant details and weaken structural information, hindering the recovery of details. Current UAV scenarios still face two key challenges: (i) paired hazy/clean images from the real world are unobtainable, while the classical atmospheric scattering model is inadequate for modeling the spatially non-uniform haze in UAV imagery; (ii) existing dehazing methods struggle to remove the heavy haze accumulated in the upper regions of UAV images. To address these issues, we first propose a UAV Atmospheric Scattering Model (UASM), which explicitly incorporates flight altitude, viewing pitch, and extinction to characterize the non-uniform haze distribution in UAV imaging. Based on UASM, we develop a physics-driven dehazing framework, termed Geometry-aware Proximal Deep Unfolding Network (GP-DUN). Specifically, GP-DUN consists of three key modules: a Latent Geometry Estimator (LGE) that infers transmittance consistent with UAV imaging geometry, a Geometry-aware Gradient Descent Module (GeoGDM) that embeds UASM into the data-fidelity term and performs physics-consistent closed-form updates, and an Pooling-Expert Proximal Mapping Module (PE-PMM) that learns an implicit prior to restore textures and structures beyond the capability of explicit physical modeling. In addition, we further construct UASM-HazeSet, which provides controllable paired synthetic data together with 2,285 real UAV haze images for testing. Extensive experiments show that GP-DUN consistently outperforms existing methods on both UASM-HazeSet and real UAV haze benchmarks.

This paper investigates the problem of position estimation of unmanned surface vessels (USVs) operating in coastal areas or in the archipelago. We propose a position estimation method where the horizon line is extracted in a 360 degree panoramic image around the USV. We design a CNN architecture to determine an approximate horizon line in the image and implicitly determine the camera orientation (the pitch and roll angles). The panoramic image is warped to compensate for the camera orientation and to generate an image from an approximately level camera. A second CNN architecture is designed to extract the pixelwise horizon line in the warped image. The extracted horizon line is correlated with digital elevation model (DEM) data in the Fourier domain using a MOSSE correlation filter. Finally, we determine the location of the maximum correlation score over the search area to estimate the position of the USV. Comprehensive experiments are performed in a field trial in the archipelago. Our approach provides promising results by achieving position estimates with GPS-level accuracy.