Synthetic-to-Real ViT-Based Pose Estimation of a Noncooperative UAV

We present an improvement on previous spacecraft pose estimation architectures that results in the lowest published mean rotation errors we know of on the SPEED+ lightbox and sunlamp test sets for a known, non-cooperative spacecraft. By using a previously established heatmap-based pose estimation architecture and adapting a large self-supervised ViT foundation model (DINOv3) in place of the smaller convolutional and ViT encoders of previous work, we show that pose estimation accuracy improves from 300M to 840M parameters with no saturation yet observed. We also evaluate our 840M model on a Jetson Orin NX 16GB, measuring single-pass network inference at 133.8 ms per crop with a board draw of 32.0 W. These measurements demonstrate embedded inference feasibility on a processor family with orbital flight heritage. Our resulting model outperforms previous models across lightbox and sunlamp domains while training only on synthetic data. Our best model, using DINOv3 840M adapted with LoRA as the encoder (rank 64, three-seed ensemble with four-rotation test-time augmentation), results in $1.56^\circ$ mean rotation error on sunlamp and $1.17^\circ$ on lightbox, compared to the previous best mean rotation errors we know of on these test sets, $2.66^\circ$ and $1.75^\circ$ by EagerNet.

For uncrewed aerial vehicles (UAVs), estimating six-degree-of-freedom (6-DoF) poses is essential for airspace situational awareness, target tracking, and counter-UAV operations. However, non-cooperative targets usually lack computer-aided design (CAD) models and keypoint priors, making existing model-based or keypoint-matching methods difficult to apply reliably. To address these challenges, this paper proposes MF-UAVPose6D, a model-free monocular 6-DoF pose estimation framework for fixed-wing UAVs. During inference, the method takes only a single red-green-blue (RGB) image and camera intrinsics as input. It first obtains a stable target anchor through heatmap-guided center localization, introduces a Perspective-Aware Module (PAM) to model observation-ray priors, exploits Dynamic Topological Sampling (DTS) to complement weak structural cues from the wings, fuselage, and tail, and adopts a decoupled translation-rotation pose decoding mechanism to estimate the 6-DoF pose. In addition, we construct the FW-UAV6DPose synthetic dataset, which covers fixed-wing UAV observations across diverse distances, viewpoints, and poses. Experimental results show that MF-UAVPose6D achieves accurate and efficient monocular 6-DoF pose estimation without requiring CAD models, and demonstrates strong robustness in long-range rotation estimation, depth recovery, and joint pose evaluation.

In this thesis, we leverage monocular cameras on aerial robots to predict depth and semantic maps in low-altitude unstructured environments. We propose a joint deep-learning architecture, named Co-SemDepth, that can perform the two tasks accurately and rapidly, and validate its effectiveness on a variety of datasets. The training of neural networks requires an abundance of annotated data, and in the UAV field, the availability of such data is limited. We introduce a new synthetic dataset in this thesis, TopAir that contains images captured with a nadir view in outdoor environments at different altitudes, helping to fill the gap. While using synthetic data for the training is convenient, it raises issues when shifting to the real domain for testing. We conduct an extensive analytical study to assess the effect of several factors on the synthetic-to-real generalization. Co-SemDepth and TaskPrompter models are used for comparison in this study. The results reveal a superior generalization performance for Co-SemDepth in depth estimation and for TaskPrompter in semantic segmentation. Also, our analysis allows us to determine which training datasets lead to a better generalization. Moreover, to help attenuate the gap between the synthetic and real domains, image style transfer techniques are explored on aerial images to convert from the synthetic to the realistic style. Cycle-GAN and Diffusion models are employed. The results reveal that diffusion models are better in the synthetic to real style transfer. In the end, we focus on the marine domain and address its challenges. Co-SemDepth is trained on a collected synthetic marine data, called MidSea, and tested on both synthetic and real data. The results reveal good generalization performance of Co-SemDepth when tested on real data from the SMD dataset while further enhancement is needed on the MIT dataset.