Post-Grasp Kinematic Repair for Robotic Insertion via Object-in-Gripper Reorientation

Non-prehensile manipulation is often used as a preparatory step for robotic grasping, yet existing approaches typically require a predefined target object pose. In practice, however, objects admit multiple graspable configurations and the desired pose is not known in advance. We reformulate non-prehensile manipulation for grasping as optimizing an object centric graspability objective rather than reaching a specific pose. We construct a graspable set from synthesized grasps and define a graspability field that measures how suitable an object configuration is for successful grasp execution. The scalar measure provides a dense learning signal for reinforcement learning and determines when to terminate manipulation. This yields a closed-loop manipulation-to-grasp pipeline driven by a single policy. Experiments in simulation and on a real robot show that the policy reliably reconfigures objects into graspable states and transitions to grasping without external planners or manually specified stopping conditions. The predicted graspability distance correlates with real world grasp success, which indicates that the learned representation captures grasp feasibility of object configurations.

A geometrically valid placement can still be difficult to execute because the selected grasp changes the required end-effector pose, collision geometry, and transport motion. Placement is formulated as a pre-execution ranking problem in which supplied grasp-placement candidates are scored before planning. The model combines a typed target-conditioned point cloud with three pose descriptors and hierarchical heads for planning success and execution success conditioned on planning. On a 30-object, 1,235-scene dataset with scene-group-held-out splits, three-seed top-1 success on covered test groups reaches 85.63 +/- 1.08% for joint selection and 79.84 +/- 0.16% for fixed-target ranking. For the designated frozen seed-42 checkpoint, top-1 success improves from 72.84% to 85.78% over full-pool cuMotion for joint ranking and from 59.65% to 79.67% for fixed-target ranking. Frozen transfer to xArm7/MoveIt requires no xArm-specific retraining. Across 27 locked cases, 13 complete end to end (48.15%). Of the 16 cases that pass Top-5 preflight and begin execution, 13 succeed (81.25%). Candidate-level deployment-feasibility prediction reaches 81.25% recall, 85.20% specificity, and 83.23% balanced accuracy.

Regrasp planning is often required when one pick-and-place cannot transfer an object from an initial pose to a goal pose while maintaining grasp feasibility. The main challenge is to reason about shared-grasp connectivity across intermediate poses, where discrete search becomes brittle. We propose an implicit multi-step regrasp planning framework based on differentiable pose sequence connectivity metrics. We model grasp feasibility under an object pose using an Energy-Based Model (EBM) and leverage energy additivity to construct a continuous energy landscape that measures pose-pair connectivity, enabling gradient-based optimization of intermediate object poses. An adaptive iterative deepening strategy is introduced to determine the minimum number of intermediate steps automatically. Experiments show that the proposed cost formulation provides smooth and informative gradients, improving planning robustness over other alternatives. They also demonstrate generalization to unseen grasp poses and cross-end-effector transfer, where a model trained with suction constraints can guide parallel gripper grasp manipulation. The multi-step planning results further highlight the effectiveness of adaptive deepening and minimum-step search.