Graph-Based Heuristics for Minimum Constraint Removal in Cluttered Robot Motion Planning

In this paper, we investigate the Minimum Obstacle Displacement Planning problem from a robot motion planning perspective. The problem involves determining a feasible path to a goal location by displacing movable obstacles when no collision-free path initially exists. We show that this problem is computationally challenging and, in particular, NP-hard when obstacles are modeled as polygons in the plane. Besides an exact formulation of the minimum obstacle displacement problem generalizing other problems in the literature, and the associated optimal solution, this paper proposes an approximate solution that is less intensive from a computational standpoint, and differs from the optimal solution by a fraction of the optimal cost, being able to trade-off between path length and amount of obstacle displacements.

Spatiotemporal motion planning, especially in multi-robot settings, requires robots to reason about collision-free regions that change over time, which is challenging in continuous spaces when feasible regions are transient and geometrically constrained. We present an algorithmic framework based on graphs of space-time convex sets (ST-GCSs), where collision-free regions are represented as convex sets in space-time and trajectories correspond to paths on the graph together with continuous motions within the selected sets. We formulate time-optimal planning on ST-GCSs as a graph-search problem over path-indexed states and develop a best-first search solver that evaluates partial paths via continuous trajectory optimization, guided by admissible heuristics and dominance checks. We further present an Exact Convex Decomposition (ECD) scheme to reserve trajectory occupancies in space-time, enabling unified handling of dynamic obstacles and multi-robot interactions. For multi-robot motion planning, we integrate ST-GCS planning and ECD into prioritized planning methods and introduce a windowed coordination scheme to improve efficiency. Extensive experiments on single-robot and multi-robot problems demonstrate substantial speedups over various planners while maintaining high solution quality, particularly in environments with narrow and transient feasible regions. Large-scale demonstrations further show that the proposed multi-robot motion planner can solve instances with up to $100$ robots within only a few minutes. Project homepage: https://sites.google.com/view/stgcs

We propose a workspace-fibered decomposition framework for motion planning in nR planar redundant manipulators operating in cluttered environments. Rather than planning directly in the full n-dimensional configuration space, the method incrementally constructs obstacle-constrained reachable workspaces of lower-dimensional non-redundant sub-chains and recursively lifts them through redundant orientation fibers. This yields a sequence of reduced planning manifolds that preserve branch-consistent reachability structure while avoiding explicit construction of the full configuration-space obstacle geometry. We first establish that, for planar position-only manipulators, the obstacle-constrained reachable workspace induced by the minimal non-redundant sub-chain provides an exact characterization of feasibility with respect to the connected component of the start configuration, enabling early infeasibility detection prior to introducing redundant degrees of freedom (DOF). We then introduce an incremental fiber-lifting procedure that propagates reachable workspace structure through successive redundant links while enforcing local inverse-kinematic branch consistency using Jacobian determinant continuity constraints. The resulting representation admits efficient reduced-space planning directly on recursively-constructed workspace-fiber manifolds. Experimental results on redundant nR planar manipulators demonstrate that the proposed construction preserves collision-free connectivity structure across successive lifting stages while substantially reducing collision checking complexity relative to direct configuration space reasoning.