Cooperative Aerial Transportation of a Payload with a Sliding Cable Attachment

Cooperative aerial transport requires controllers that respect nonlinear manifold geometry, operate without centralized coordination, and respect operational safety constraints. To address these demands, we present GPAC, a four-layer hierarchical architecture that enables $N$ quadrotors to transport a cable-suspended payload without a central coordinator or by exchanging cable states or adaptive parameters. The key insight is implicit coordination: each quadrotor independently estimates its effective load share from local cable measurements, so combined forces converge to the correct total, even without knowledge of $N$ or the payload mass; the payload position is reconstructed locally from each agent's own cable geometry, and the only inter-agent communication is a low-rate neighbor-position broadcast for collision avoidance. GPAC operates directly on the full nonlinear configuration manifold and integrates geometric position and attitude control, anti-swing regulation, an extended-state observer for wind rejection, concurrent learning-based mass estimation without persistent excitation, and a priority-ordered control barrier function (CBF)-inspired safety filter that reduces operational risk, with input-to-state safety (ISSf) margins that hold exactly under single-constraint activation. A compatibility result shows that the filter's force modifications keep the desired attitude within the almost-global stability region of the $\mathrm{SO}(3)$ attitude controller. Finally, high-fidelity simulation with flexible cables, onboard sensor fusion, and wind turbulence -- with all control and estimation loops closed through the estimator -- yields a mean payload-tracking RMSE of 33.8 cm (2.8% coefficient of variation over 13 seeds) at a low per-agent computational cost.

Quadrotors offer the agility needed to rapidly transport suspended payloads during time-critical applications, including search-and-rescue and medical delivery. While suspended-payload transport and traversal for these missions are well studied, the highly dynamic targeted release of the payload remains comparatively underexplored. State-of-the-art approaches typically rely on model-based trajectory optimization and tracking; however, these methods often yield sub-optimal performance due to conservative feasibility constraints, tracking errors, and the inherent difficulty of analytically modeling flexible rope dynamics. To overcome these limitations, we propose a hybrid simulation framework that couples a high-fidelity analytical quadrotor model with a physics solver for complex rope and payload interactions. By exchanging forces between the two domains at every step, we obtain a physically accurate simulation of the suspended-payload system. Leveraging this environment, we train a deep reinforcement learning (RL) policy that executes agile, accurate payload throws to designated targets. Deployed zero-shot on hardware, our RL policy pushes the boundary of the agility-accuracy trade-off, outperforming the model-based baseline by reducing the landing error by up to 50% and the throw duration by up to 30%. Ablation studies confirm that the coupled simulation is the key enabler of these gains. We further show that the same pipeline trains a policy driven by visual observations rather than an explicit state estimate, achieving accuracy comparable to that of the state-based policy. To accelerate future research in dynamic aerial manipulation, we open-source the simulator to the community upon acceptance.

This work proposes a novel control and estimation approach for aerial manipulation of a cable-suspended load using Unmanned Aerial Vehicles (UAVs). Common approaches in the state of the art have practical limitations, relying on direct load measurements and Lagrangian methods for dynamic modeling. The lack of a straightforward dynamic model of the system led us to propose adopting the Udwadia-Kalaba method to explicitly incorporate the cable's geometric constraints. This formulation allowed for the consistent derivation of the tension force and its direct integration into the NMPC prediction model. Additionally, we propose a sensorless load state estimation based on the same geometric constraints. Results from real-robot experiments demonstrated that the explicit inclusion of load dynamics in the optimization problem significantly reduces trajectory-tracking errors and yields better overall performance compared to strategies based on incomplete models.