cs.RONov 2, 2026

Central pivot point control of a body-attached spring-mass runner: periodic gaits, stabilization, template embedding and approximate analytic return maps

Authors: İzel Sever, O. Kaan Karagöz, M. Mert Ankaralı

Organizations: Department of Electrical and Electronics Engineering, Middle East Technical University, 06800 Ankara, Türkiye · Roketsan Inc., Ankara, Türkiye · Center for Robotics and Artificial Intelligence (ROMER), Middle East Technical University, 06800 Ankara, Türkiye

Abstract

The spring-loaded inverted pendulum (SLIP) describes the center-of-mass (COM) motion of runners but has no trunk. In trunk models, the hip torque couples posture and COM motion and destroys the central-force structure on which SLIP analysis relies. As a result, trunk models have been studied almost only numerically. We show that this structure can be restored. The central pivot point (CPP), a hip-torque law that directs the ground reaction force through the COM, decouples pitch exactly and reduces stance to a planar central-force problem. At upright posture, time-reversal symmetry produces one-parameter families of periodic gaits. A stance-phase pitch law and a stride-level regulator stabilize all computed gaits, also with bounded hip torque and friction. Under CPP, any radial force law in virtual-leg coordinates can be embedded independently of posture. For a linear radial template, the stance radius and the constant-momentum sweep have exact closed forms. With a new gravity correction, the resulting analytic return map, to our knowledge the first for a trunk model, predicts liftoff velocity and apex position with mean errors of 1.6% and 0.9%. The natural gaits of the embedded runner are symmetric and need no force step at touchdown. A near-reversibility argument explains their unit multiplier, and a scalar equation predicts them within 0.8%. A deadbeat stride controller based on the analytic map tracks changes of speed, height and posture. CPP thus makes trunk models accessible to the analytic tools developed for SLIP.

Figures & tables

Explore similar work

May 7, 2026

On the Emergence of Pendular Structure in Multi-Contact Locomotion

LIPM is everywhere in legged-locomotion control, but almost always as a modeling choice rather than as something the controller's cost actually prefers. This note tries to make that link more explicit. Working from a small centroidal OCP that penalizes the rate of angular momentum, we look at what its optimum tends to look like. Three things come out. With full-rank stance, the optimum drifts toward a pendular force pattern at a rate determined by the SVD of the moment Jacobian; the constant is set by foot-span geometry and matches the experiments to within 16%. With N=2 stance, as in trot, the friction cone introduces a lower bound on ∥H˙G∥\|\dot{H}_G\| that no amount of weight tuning fixes; we also see a non-smooth feasibility kink at a critical horizontal acceleration that we can write in closed form. Adding a task term that asks for a nonzero H˙G\dot{H}_G moves the optimum off the pendular set in a predictable way. None of this is far from the classical ZMP/DCM picture. We test these claims on a point-mass quadruped and on the Unitree Go1 in MuJoCo (open-loop QP and a torque-level closed-loop controller), and we note where the asymptotic story stops being a good description of what the closed loop actually does.
Aug 11, 2026

Hip Energized Monopedal Hopping

We present a novel stepping strategy for pitch unlocked planar monopeds where the reaction torques from stabilizing pitch with a conventional PD + feedfoward controller are recruited to counteract energetic losses from damping. By moving the location of the mass center, our controller increases the pitch stabilization torque, thereby adding energy to the gait. A new stepping policy adjusts the distribution of energy between the radial and angular degrees of freedom to counteract dissipative losses and achieve a user specified balance between steady state fore-aft speed and apex height. Hybrid averaging analysis yields closed form expressions for the fixed points and eigenvalues of the resulting gait, lending insight into the interplay between the physical and control parameters' influence on performance. Simulation studies on a generic 5 link biped and a careful model of the Penn Jerboa reveal a useful correspondence to these analytical predictions. Physical experiments on the Penn Jerboa exhibit stable locomotion with speeds ranging from 1.02 m/s to 1.77 m/s (5.10 leg lengths/s to 8.85 leg lengths/s) in a manner effectively approximated by the mathematical analysis.
Feb 10, 2018

The Strange Attractor Model of Bipedal Locomotion and its Consequences on Motor Control

Despite decades of research, the dynamic mechanisms governing human locomotion remain incompletely understood. Current motor control models only partially capture these complex dynamics, a theoretical gap that likely limits the clinical efficacy of modern lower-limb rehabilitation therapies. Recently, it has been proposed that human locomotion is planned in task-space by explicitly exploiting the gravitational pull acting on the Center of Mass (CoM). Building upon this concept, this paper presents a novel deterministic task-space planner for straight, constant-speed locomotion. Our model formulates the CoM trajectory in the transverse plane as a harmonic oscillator moving at a constant forward velocity, while demonstrating that the vertical CoM trajectory is actively regulated through localized ankle strategies. We derive closed-form equations that successfully generate human-like trajectories for both the CoM and the swing foot. The model's predictive accuracy is empirically validated against the kinematic behavior of 12 healthy subjects walking at three self-selected speeds. Furthermore, the proposed planner is mathematically compatible with an extended formulation of the Passive Motion Paradigm (λ0λ_0-PMP), establishing a comprehensive theoretical foundation for decentralized, hierarchical architectures of semi-autonomous controllers in both human motor control and assistive robotics.