cs.RONov 4, 2026

Adaptive Hybrid Force-Vision Control with EMG-Derived References for Deformable Bottle Manipulation

Authors: Jeffrey Lee, Geoffrey Hanks, Evangeline Bouganim, Yue Hu

Organizations: Department of Mechanical and Mechatronics Engineering, University of Waterloo, Canada

Abstract

Robotic automation of laboratory tasks has become a growing interest to remove researchers from hazardous environments and repetitive procedures. However, even equipment as simple as squeeze bottles poses a challenging manipulation problem due to its deformability. This paper presents an adaptive hybrid vision-force controller for robotic grippers to effectively manipulate laboratory squeeze bottles to dispense liquid. This approach integrates force and vision feedback according to the interaction state, enabling effective squeezing while accounting for bottle deformation and recovery. The proposed controller is validated by comparing its performance with a pure force controller on 12 combinations of conditions consisting of 2 target dispense volumes, 2 plastic squeeze bottles, and 1 to 3 squeezes used to dispense. Human demonstrations of these operating conditions were collected using electromyography (EMG) sensing mapped to a desired grip force, which was then used as the force reference for the controllers to squeeze the bottles. Results demonstrated that the proposed adaptive hybrid vision-force controller achieved more accurate liquid dispensing with a mean absolute error (MAE) of 6.54 mL compared to a MAE of 15.92 mL from the pure force controller, while also replicating the human action recorded from the EMG signal more closely.

Figures & tables

Explore similar work

Jun 24, 2026

ForceBand: Learning Forceful Manipulation with sEMG

Human demonstrations are a scalable data source for learning robot manipulation policies. However, common sources of human demonstration data, such as motion-capture trajectories and internet videos, capture mostly motion and appearance while missing the contact forces that are critical for force-sensitive manipulation. In this paper, we introduce ForceBand, a low-cost wrist-worn sEMG system that turns human muscle activity into force-enriched demonstrations. We first collect a 10-hour multimodal dataset containing egocentric video, sEMG, IMU, and fingertip force measurements across diverse actions and objects. Using this dataset, we pre-train an EMG2Force model that predicts per-finger forces from sEMG and IMU signals. After a short user-specific calibration, users can collect target-task demonstrations using only ForceBand and video; EMG2Force then labels these demonstrations with per-finger force traces, producing force-augmented demonstrations for robot policy learning. Experiments show that ForceBand recovers fine-grained fingertip interactions with over 50% lower force prediction error than vision-based baselines and achieves an 87% success rate on pick, squeeze, and place tasks that require object-specific force control across objects with diverse shapes, sizes, and weights. Project website: https://forceband-emg.github.io
May 22, 2026

TactileReflex: Noise-Statistics-Driven Vision-Tactile Reflex Control for Force-Sensitive Manipulation

Manipulating fragile deformable containers, such as disposable plastic cups filled with liquid, demands real-time grip-force adaptation within an extremely narrow force margin: insufficient force causes slip, while excessive force irreversibly deforms the thin wall. Existing approaches struggle to achieve such force-sensitive manipulation tasks. We propose a noise-statistics-based calibration-driven reflex control paradigm with vision-based tactile sensing: by analyzing the sensor's intrinsic noise characteristics (via a brief static-hold-and-unload protocol), we directly derive all controller thresholds, eliminating external force calibration, trial-and-error manual tuning, or material-specific physical models. Instantiating this paradigm, we present TactileReflex, a three-channel closed-loop controller that extracts three image-level proxies, shear intensity (SyS_y), contact intensity (FnF_n), and center of pressure (CC), from dual visuo-tactile sensors and drives prioritized reflex channels at ~12 Hz for slip suppression, weight-adaptive release, and force protection. Each channel closes the loop directly on its proxy via noise-derived thresholds. Ablation demonstrates that only the full three-channel system is able to prevent irreversible container deformation (5/5 success vs. at most 1/5 for partial configurations). In a dynamic pouring task, fixed-effort baselines fail in all 10 attempts due to pose drift, while TactileReflex achieves 9/10 success across two water volumes. As a self-contained and interpretable controller, TactileReflex can serve as a plug-and-play safety layer beneath high-level manipulation pipelines, including haptic-free VR teleoperation and vision-language-action (VLA) policies.
Oct 3, 2026

Robot Learning with Visual Predicted Force

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.