cs.RONov 5, 2026

Data-Driven Configuration of Protective Separation Zones in Collaborative Robot Cells from Operator Occupancy

Authors: Aulon Bajrami, Theo Jacobs, Werner Kraus

Organizations: Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Stuttgart, Germany

Abstract

The protective separation zone of a collaborative robot cell is commonly dimensioned for a worst case that disregards where the operator is actually present during the task. This paper presents a camera-based, data-driven method that configures this zone from observed operator occupancy. Operator positions accumulated over several production shifts are aggregated into an occupancy heatmap, from which a protective field is derived that trades off the achievable robot velocity against the required safety distance, following the speed and separation monitoring principle of ISO/TS 15066. The resulting configuration is advisory, that is, reviewed within the risk assessment rather than applied autonomously to the robot controller. The method, which builds on a pose-based perception pipeline with activity recognition, was evaluated in two operational cells at two industrial partners, where the protective field could be reduced by approximately 17% and a productivity increase of 9% was measured. However, adoption proved to depend on more than the demonstrated gain alone.

Figures & tables

Explore similar work

CardsList
  1. Embedding ISO 10218 Safety Compliance in Robots via Control Barrier Functions for Human-Robot Collaboration

    Jun 11, 2026Federico Parma, Cesare Tonola, Nicola Pedrocchi +1Control Barrier FunctionsRobotics

  2. Adaptive Collision Sensitivity for Efficient and Safe Human-Robot Collaboration

    Sep 30, 2024Lukas Rustler, Matej Misar, Matej HoffmannRobot SafetyHuman-Robot Collaboration

  3. Jiao: Bridging Isolation and Customization in Mixed Criticality Robotics

    May 5, 2026James Yen, Zhibai Huang, Zhixiang Wei +5Real-Time Robot ControlSafety-Critical Control