cs.RONov 5, 2026

ForPC: Force-Aware Whole-Body Control for Precise Humanoid Cart Pushing

Authors: ZhenYu Zou, Xing Liu, ShiChuang Wang, YunLong Dong, LiNan Deng, Feng Hua, Jun Wan, Cheng Cheng

Abstract

Humanoid robots are expected to take over strenuous material handling in manufacturing, logistics, and healthcare, where operating existing wheeled carts would let them move heavy loads without modifying the workplace. However, humanoid cart pushing remains challenging because the bimanual grasp closes a force-coupled loop in which the contact wrenches that drive the cart also disturb the robot's balance, and payload changes alter the coupled dynamics. We propose ForPC, a force-aware whole-body control framework that regulates cart velocity through two-stage reinforcement learning. A locomotion prior is first trained under varied hand loads and upper-body postures to provide balance support. A force latent and a state latent are then inferred from onboard observations, without external force sensors, and fed to a residual policy that coordinates bounded arm, waist, and leg adjustments with base-velocity commands. Multi-objective rewards penalize bimanual internal opposition, grasp slip, and actuator saturation, encouraging the policy to apply contact force on demand without human demonstrations. Sim-to-sim experiments show that ForPC reduces cart-velocity RMSE by up to 68.2% relative to a locomotion-only baseline (Loco-only) and cross-track RMSE by up to 74.2% on the multi-bend route. Trained solely in simulation, the policy also transfers to a physical Unitree G1 without real-world training or fine-tuning and, with no payload-specific adjustment, pushes a cart carrying up to 30 kg at 0.5 m/s. These results suggest that humanoid robots could eventually replace humans for efficient material handling in daily life.

Figures & tables

Explore similar work

Oct 3, 2026

Humanoid Rickshaw Pulling: Whole-Body Locomotion under Coupled Wheeled Loads

Humanoid robots could transport payloads substantially heavier than themselves by pulling passive wheeled vehicles instead of carrying the load. This capability, however, creates a coupled locomotion problem: the robot must maintain persistent upper-body contact while adapting to unknown, configuration-dependent forces arising from the payload, vehicle, and terrain. We present a whole-body control framework for humanoid rickshaw pulling that tracks commanded vehicle motion while preserving balance and stable grasps under uncertain load dynamics. During training, a privileged teacher exploits vehicle states, interaction forces, and load properties. Its actions and latent are distilled into a history-conditioned student that implicitly infers coupled dynamics from proprioceptive responses, followed by reinforcement-learning fine-tuning. Comparisons with No History and Only History baselines show that the resulting policy achieves accurate vehicle tracking while reducing vehicle oscillation, torso tilt, and actuation cost. Behavioral analysis shows that Unitree G1 propels the rickshaw and generates gait-synchronized whole-body reactions that stabilize its lateral and roll motions. Moreover, pulling redistributes joint effort and yields a lower robot-normalized cost-of-transport proxy than unloaded walking over most tested load--speed conditions. On hardware, a single policy performs starting, sustained pulling, turning, and stopping with both rigid payloads and human passengers, handling a loaded rickshaw mass of up to 115~kg without load-specific retuning. These results demonstrate robust heavy-load transportation through coordinated and persistent humanoid--vehicle interaction.
Nov 12, 2026

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.
Oct 6, 2026

HULK: Learning Whole-Body Forceful Loco-Manipulation for Humanoids

Humanoid loco-manipulation of large, heavy objects demands forceful interaction across the entire body. However, such payloads shift a humanoid's center of mass and impose sustained loads across the upper body, challenging balance and command tracking. We present HULK, a whole-body control framework for forceful loco-manipulation. Using model predictive control (MPC) to guide reinforcement learning with predictions of the loaded dynamics, we train two teachers: one tracks arm motions under wrist forces, and the other locomotes while holding large objects against the body. A capture-point control barrier function augments the wrist-force teacher during training to improve balance under load. We distill both teachers into a single policy. Evaluation spans simulation and the Unitree G1. In simulation, the teacher with the barrier function achieves the lowest forward and lateral velocity tracking errors at 10 kg per arm among evaluated controllers and reduces aggregate divergent component of motion (DCM) excursion magnitude by 35.7% relative to MPC-guided reinforcement learning alone. Our wrist-force teacher withstands torso push disturbances of up to 130 N.