A wearable input/output interface learns personalized models of haptic perception
Authors: Wen Li, E. Magnus Adams, Zijie Xu, Jiawen Yao, Aybala Esmer, Xiaoyue Ni, Bozhi Tian, Pedro Lopes
Organizations: Department of Chemistry, The University of Chicago, Chicago, IL, 60637, USA. · Department of Computer Science, The University of Chicago, Chicago, IL, 60637, USA. · Department of Physics, The University of Chicago, Chicago, IL, 60637, USA. · Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC, 27708, USA. · Department of Biostatistics and Bioinformatics, Duke University, Durham, NC, 27708, USA. · Department of Electrical and Computer Engineering, Duke University, Durham, NC 27708, USA. · The James Franck Institute, The University of Chicago, Chicago, IL, 60637, USA. · The Institute for Biophysical Dynamics, The University of Chicago, Chicago, IL, 60637, USA. · Neuroscience Institute, The University of Chicago, Chicago, IL, 60637, USA.
Wearable haptic interfaces deliver physical stimuli to the skin, yet perceived locations vary widely across users and diverge from actuator locations, particularly for emergent tactile-feedback techniques. We developed a wearable haptic input/output (I/O) device integrating a 36-channel electrotactile array with capacitive touch sensing, enabling stimulation and user-reported percept locations to be registered within the same body-referenced coordinate frame. In 24 participants, the device revealed electrotactile and referred-thermal perceptual maps with notable interparticipant variability. Despite this variability, both modalities retained electrode-pair-specific spatial structure across participants. Tactile and thermal percepts also showed spatial correspondence, whose strength varied across participants. These findings motivated our human-in-the-loop calibration framework, which adapts a forward-prediction strategy to individual users and generates personalized perceptual models. These models enabled inverse rendering by selecting stimulation patterns predicted to generate a target percept for a specific user. Using these models, we demonstrate personalized haptic rendering in haptic-guided robot teleoperation, visual-to-haptic sensory substitution, interpersonal haptic communication, and virtual reality (VR). Together, this platform provides a route toward adaptive haptic interfaces that measure, model, and render according to each user's perception.
We present a system of two wearable pneumatic haptic devices that supports continuous, closed-loop, bidirectional tactile interaction at perceptually relevant force and temporal scales. A single device can contain up to twelve pressure sensing channels connected to textile-based pneumatic pouches. Each channel in a device can be used as a sensor, an actuator, or both. As an actuator with integrated sensing, the channel generates stable skin indentation through local closed-loop control. As a sensor, a channel can be mounted (or worn) on any surface, including on a robot gripper or on the human body, and used to measure touch interactions with the environment or a human user. A distributed architecture supports sustained pressure output, rapid dynamic response, and wireless pairing of identical devices in a system to transmit and reproduce tactile pressure signals in real time. Device-level characterization demonstrates force bandwidth exceeding 30 Hz, rapid and well-damped step responses, and extended pressure retention compared to prior compact pneumatic platforms. Human studies show that pressure-based fingertip feedback enables discrimination of force and stiffness, improves teleoperated manipulation by reducing applied pressures by up to 23.1% and task duration by up to 27.4%, and lowers subjective mental workload by 18.8%, particularly under visually constrained conditions. By unifying tactile sensing and haptic feedback within a single pneumatic modality, the device provides a practical foundation for bidirectional touch interaction in teleoperation.
Cosima du Pasquier, Aliyah Smith, Serin Huber +5
Department of Mechanical Engineering, Stanford University, Stanford, CA, USA
Object manipulation is fundamental to virtual reality (VR) applications, yet conventional fingertip haptic devices fail to render certain tactile features relevant for immersive and precise interactions, as i.e. detection of edges. This paper presents a compact, lightweight fingertip haptic device (24.3 g) that delivers distinguishable surface and edge contact feedback through a novel dual-motor mechanism. Pressure distribution characterization using a 6 x 6 flexible sensor array demonstrates distinct contact patterns between the two stimulation modes. A preliminary user study with five participants achieved 93% average classification accuracy across four conditions (edge/surface contact with light/heavy pressure), with mean response times of 2.79 seconds. The results indicate that the proposed device can effectively convey edge and surface tactile cues, potentially enhancing object manipulation fidelity in VR environments.
Rui Chen, Xianlong Mai, Alireza Sanaei +3
Institute of Mechanical Intelligence, School of Advanced Studies Sant’Anna (SSSA), 56127 Pisa, Italy. · CAS Key Laboratory of Mechanical Behavior and Design of Materials, Institute of Humanoid Robots, School of Engineering Sciences, University of Science and Technology of China, Hefei, China.
Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.
Ruitong Tian, Fang Xu, Noah B. Wilson +2
Department of Civil and Coastal Engineering, University of Florida, Gainesville, FL, USA. · Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA.