Organizations: Department of Computer and Software Engineering, Polytechnique Montreal, Montreal, Canada. · Mila - Quebec AI Institute, Montreal, Canada. · National Research Council Canada, Montreal, Canada.
Geometric foundation models estimate dense geometry and camera parameters from monocular images, but reliable SLAM also requires consistent scale and accurate data association across successive reconstructions. We present DASH-SLAM, a monocular SLAM system that integrates metric depth predictions from pretrained Depth Anything 3 into a shared-keyframe pose graph without task-specific fine-tuning. DASH-SLAM derives scale corrections from depth ratios at shared anchor images and accumulates them across reconstructions, with a damping factor controlling their influence. These corrections rescale odometry translations, loop constraints, and map geometry. Experiments on TUM, Replica, and 7-Scenes show that DASH-SLAM outperforms state-of-the-art methods. We evaluate performance using both rigid and similarity alignment to distinguish metric-scale fidelity from accuracy up to scale. We further evaluate DASH-SLAM on four challenging sequences in perceptually-degraded environments from the Unified Autonomy Stack field dataset, covering tunnels, fog, and a frozen lake. On these sequences, DASH-SLAM outperforms the foundation-model SLAM state-of-the-art and maintains tracking where classical SLAM methods fail.
Figures & tables
Fig. 1: DASH-SLAM overview. The front end selects keyframes from the incoming image stream, and the inference stage constructs submaps using Depth Anything 3. The back end propagates metric scale across consecutive submaps through their shared anchor frames. The loop-closure thread detects revisited places and passes loop constraints to the back end, which optimises the global pose graph.
Fig. 2: Visualization of a robot’s trajectory and map obtained online with DASH-SLAM in a laboratory setting. Submaps are identified in different colors. In this real-world experiment, DASH-SLAM achieved 13.57 FPS and a peak RAM usage of 14.51 GB on an NVIDIA Jetson AGX Orin.
Sim(3)
Average
360
desk
desk2
floor
plant
room
rpy
teddy
xyz
Sim(3)
SE(3)
FPS
Calibrated
ORB-SLAM3 [ 2 ]
X
0.016
X
0.015
0.111
X
0.062
X
0.009
X
X
25.2
DPV-SLAM [ 14 ]
0.153
0.021
0.038
0.130
0.024
0.330
0.030
0.084
0.013
0.091
0.398
16.9
DPV-SLAM++ [ 14 ]
0.175
0.021
0.037
0.137
0.020
0.236
0.026
0.090
0.012
0.084
63.971
16.8
DROID-SLAM [ 23 ]
0.155
0.017
0.504
0.025
0.017
0.071
0.057
0.045
0.040
0.103
0.258
33.6
MASt3R-SLAM [ 17 ]
0.048
0.016
0.024
0.025
0.020
0.061
0.023
0.040
0.009
0.030
0.116
8.9
TABLE I: ATE RMSE (m) on TUM RGB-D
Sim(3)
SE(3)
FPS
Calibrated
ORB-SLAM3 [ 2 ]
0.019
0.659
26.0
DPV-SLAM [ 14 ]
0.899
8.449
15.0
DPV-SLAM++ [ 14 ]
0.935
5.865
15.6
DROID-SLAM [ 23 ]
0.681
0.806
74.9
MASt3R-SLAM [ 17 ]
0.015
0.093
13.6
Uncalibrated
DROID-SLAM [ 23 ]
0.803
1.694
75.8
TABLE II: Average ATE RMSE (m) and runtime (FPS) on Replica.
Sim(3)
SE(3)
FPS
Calibrated
ORB-SLAM3 [ 2 ]
0.130
0.487
24.9
DPV-SLAM [ 14 ]
0.622
8.482
17.8
DPV-SLAM++ [ 14 ]
0.630
4.252
17.6
DROID-SLAM [ 23 ]
0.341
0.433
66.6
MASt3R-SLAM [ 17 ]
0.049
0.134
9.5
Uncalibrated
DROID-SLAM [ 23 ]
0.336
0.447
67.3
TABLE III: Average ATE RMSE (m) and runtime (FPS) on 7-Scenes.
DASH-SLAM
DA3-Streaming
Dataset
Scale
Deviation
Scale
Deviation
TUM
1.021
2.1%
0.871
12.9%
Replica
1.050
5.0%
1.041
4.1%
7-Scenes
1.008
0.8%
0.971
2.9%
TABLE IV: Estimated trajectory scale and deviation from metric scale.
Fyllin.
Hornb.
Frozen
Campus
lake
fog
ORB-SLAM3 [ 2 ]
×
×
6.84
1.68
VGGT-SLAM2.0 [ 15 ]
196.93
148.90
76.06
46.08
DASH-SLAM
64.19
75.84
74.35
2.66
TABLE V: UAS ATE RMSE (m) with Sim(3) alignment
Fig. 3: Ground truth and estimated UAS trajectories after Sim(3) and SE(3) alignment. Crosses mark the last ORB-SLAM3 poses before tracking failures.
The School of Electrical Engineering, KAIST (Korea Advanced Institute of Science and Technology), Daejeon, 34141, Republic of Korea · KAIST InnoCORE LLM, KAIST, Daejeon, 34141, Republic of Korea