Concurrent Learning-Based Inertial Parameter Estimation and Control of Quadrotors
Authors: Sandesh Thapa, He Bai
Organizations: ETAIC Lab, University of Texas at Arlington, Arlington, TX 76019, USA · School of Mechanical & Aerospace Engineering, Oklahoma State University, Stillwater, OK 74078, USA
In this letter, we consider trajectory tracking control and inertial parameter estimation of a quadrotor UAV whose center of mass (CoM) does not coincide with its geometric center. Onboard payloads like an IMU, a camera, or a battery are not necessarily placed at its geometric center. Moreover, during the flight these sensors might move because of external disturbances and cause a CoM offset. Thus, these events and equipment introduce an offset and cause the inertia matrix to be non-diagonal. We develop an integral concurrent learning (ICL)-based geometric controller that estimates the mass, the CoM offset, and the full inertia matrix online, without an accelerometer or numerical derivatives, and tracks a given trajectory corrected by the offset estimated online. We prove that the estimated parameters converge to their true values under a finite excitation condition. We validate the effectiveness of the proposed algorithm using a simulation example.
Figures & tables
Fig. 1: Quadrotor with the inertial frame Σi (north-east-down), the body frame Ob at the thrust center O and Cm at the CoM G , with unknown offset rm .
Fig. 2: Control architecture.
Fig. 3: Parameter estimates of the proposed controller without noise and with sensor noise, verical lines indicates T∗
Fig. 4: CoM error ∥xm−xd∥ and attitude error angle of the proposed controller without noise and of the offset-unaware controller and minimum eigenvalues of the scaled stacks.