cs.RONov 8, 2026

A Physical Testbed for Self-Driving Laboratories: Comparing Bayesian and Agentic Optimization in a Minimal Closed-Loop Color Formulation Task

Authors: Tony Qin, Ziheng Wu, Maximilian Schommer, Roya Amini-Naieni, Aldair Gongora

Organizations: Department of Computer Science, The University of North Carolina at Chapel Hill, Chapel Hill, North Carolina, 27599, USA · Lawrence Livermore National Laboratory, Livermore, California, 94550, USA · Trilobio, San Francisco, California, 94107, USA

Abstract

Self-driving laboratories (SDLs) integrate laboratory robotics and automation with AI-driven decision-making to close the design-build-test-learn (DBTL) cycle. However, physical testbeds that combine off-the-shelf hardware and AI into a functioning closed-loop workflow remain in early stages of development, and their integration with commercial laboratory automation is comparatively less developed. In this work, we develop a physical testbed that assembles and integrates commercially available laboratory automation instruments and demonstrate continuous, closed-loop, autonomous operation over 24 cumulative hours of unattended experimentation. We validate this platform on a minimal closed-loop discovery task in which the system autonomously formulates aqueous dye mixtures to match a target absorbance spectrum. The system completed six independent campaigns, each consisting of 48 closed-loop iterations over approximately four hours. In every campaign, the system autonomously selected, dispensed, and measured each mixture, with an AI-driven decision-making algorithm determining subsequent formulations without human intervention. Using this testbed, we compared the performance of two AI-driven decision-making algorithms, traditional Bayesian optimization (BO) and an agentic approach, in selecting mixtures under a fixed total-volume constraint. The agentic optimizer matched target absorbance spectra using fewer iterations than BO, with reductions up to 52%, and converged on a solution for one target that BO failed to match within 48 iterations. These results demonstrate a reference physical platform for SDLs that can evaluate both established and emerging AI strategies, including large language model (LLM)-directed optimization, before their deployment in real-world applications where experiments may be costly and time-consuming to prepare.

Figures & tables

Explore similar work

Sep 3, 2026

La Agente Óptima: Towards Agentic Self-Driving Laboratories

Self-driving laboratories (SDLs) combine automated experimentation with adaptive decision-making to accelerate scientific discovery. Their operation nevertheless often depends on human specialists who translate scientific objectives into executable closed-loop campaigns. Specialists adjust them as data and operating conditions change. Here, we present La Agente Óptima, an agentic framework that constructs and supervises Bayesian optimization campaigns across computational and experimental systems while maintaining a persistent optimization state. By separating large language model (LLM) reasoning from executed campaigns, Óptima runs repetitive optimization loops consistently, returns control to the agent only when progress requires interpretation or campaign revision, and keeps every decision auditable. We evaluate Óptima across ablation studies, five digital discovery tasks, and two physical platforms. Throughout, Óptima maintained executable campaigns as both the scientific problem and execution environment evolved. In a closed-loop contact angle optimization campaign, Óptima identified and corrected a mid-run measurement failure, bringing the contact angle from 71.4 to 67.8 degrees, just above the 64-66 degree range. From this result, Óptima correctly inferred that the target was likely unattainable with the available reagents and recommended changing the formulation. In a five-day multi-objective flow-chemistry campaign, Óptima increased the yield from 30% to 59% over 23 experiments. Despite substantial inference costs, it cost less and used substantially less starting material than a human-directed campaign, while selecting a more mass-efficient operating point. These results show that LLM-based agents can make rigorous, long-running optimization campaigns accessible to domain scientists without specialist setup, expanding the scope of SDLs.
Jul 5, 2026

Compressing the Validation Bottleneck: An Agentic Self-Driving Lab for Scientific Discovery

Agentic AI-for-Science can automate ideation, planning, and analysis, but final validation still depends on real experiments. A self-driving lab (SDL) can execute those experiments, yet the loop still has bottlenecks: the agent may spend too many rounds on low-value experiments, or each round may require a high-cost experiment. We target these two physical bottlenecks with one agent. First, a prior-aware agentic DOE loop uses domain knowledge and past results to propose feasible and informative next experiments, reducing trials-to-target. Second, a cost-aware surrogate agent predicts high-cost, high-resolution measurements from low-cost, low-resolution measurements. It chooses between a high- and a low-cost measurement based on the predicted uncertainty. We examine these directions in the biology and materials domains, respectively. Together, under a single agent, these components aim to accelerate the SDL loop by reducing both the number of loops and the cost per experiment.
Oct 16, 2026

Self-Building Labs

Self-driving laboratories (SDLs) accelerate scientific discovery by automating experimental execution and optimization. AI agents can increasingly propose new experiments, but existing SDLs can only run the procedures they were built for. Adapting them to a new experiment still requires extensive manual engineering, which makes laboratory flexibility the bottleneck for scaling discovery. We introduce the self-building laboratory (SBL), which designs, configures, and operates its own laboratory setup given a high-level scientific goal. SBL starts from whatever already exists, from an empty room to a working SDL, and builds the missing capabilities: the lab layout, its digital twin, robot skills, and experimental workflows. We demonstrate the system working across different robots and setups, scaling from a single workstation to laboratories with several robots working together. We validate SBL's end-to-end capabilities through a real-world quantum-dot synthesis experiment. By shifting human researchers from manually configuring and programming device automation to specifying scientific objectives, SBL makes scientific automation more accessible, flexible, and scalable. Project website: https://self-building-labs.github.io/