Efficient robotic 3D reconstruction requires selecting views that contribute new surface measurements with few physical captures. Pretrained world models can guide this choice, but a predicted surface may not produce valid depth measurements under the operating conditions of the deployed sensor. We present a deployment adaptation methodology for next-best-view selection that learns a sensor-return adapter from limited local calibration data while keeping the pretrained predictor fixed. The adapter estimates measurement dropout over each predicted surface, allowing the selection method to favor views likely to fill gaps in the measured reconstruction. In a real-robot experiment with a structured-light sensor, the adapted method achieves higher measured surface coverage with 60% fewer captures than nominal selection. The adapted method recovers a surface region that the nominal method repeatedly targets but fails to measure. These results suggest that robots can reuse pretrained predictive models while adapting their decisions to local operating conditions in data-scarce environments.
Figures & tables
Figure 1: Deployment-aware next-best-view selection. A fixed predictor supplies geometry; a locally learned adapter estimates sensor return for action scoring. Captures update the reconstruction.
Figure 2: (a) FrameCrafter RGB predictions at 4 candidate views of the held-out blue helmet. (b) Measured reconstructions: nominal selection leaves a lower-edge gap after 10 captures (97.5% coverage), while deployment-aware selection recovers it within 4 (98.4%). Boxes highlight this region.
Method
Final coverage (%)
Number of Captures
Realized / predicted gain after capture 2 (%)
Nominal Selection
97.5
10
11.7
Deployment-aware Selection
98.4
4
114.8
Table 1: Reconstruction results on the held-out blue helmet.
Next-best-view planning selects camera or sensor viewpoints that gather useful evidence while balancing coverage, reconstruction quality, and motion cost.
What makes a good viewpoint? The quality of the data used to learn 3D reconstructions is crucial for enabling efficient and accurate scene modeling. We study the active view selection problem and develop a principled analysis that yields a simple and interpretable criterion for selecting informative camera poses. Our key insight is that informative views can be obtained by minimizing a tractable approximation of the Fisher Information Gain, which reduces to favoring viewpoints that cover geometry that has been insufficiently observed by past cameras. This leads to a lightweight coverage-based view selection metric that avoids expensive transmittance estimation and is robust to noise and training dynamics. We call this metric COVER (Camera Optimization for View Exploration and Reconstruction). We integrate our method into the Nerfstudio framework and evaluate it on real datasets within fixed and embodied data acquisition scenarios. Across multiple datasets and radiance-field baselines, our method consistently improves reconstruction quality compared to state-of-the-art active view selection methods. Additional visualizations and our Nerfstudio package can be found at https://chengine.github.io/nbv_gym/.
We develop a framework for task-specific active next-best-view selection in 3D reconstruction from point clouds, by casting the problem in the language of Bayesian decision theory. Our framework works by (a) placing a prior distribution over the space of implicit surfaces, (b) using recently-developed stochastic surface reconstruction methods to calculate the resulting posterior distribution, then (c) using the posterior distribution to carefully reason about which view to scan next. This enables us to perform camera selection in a manner that is directly optimized for the intended use of the reconstructed data - meaning, we reduce uncertainty only in those regions that make a difference in the task at hand, as opposed to prior approaches that reduce it uniformly across space. We evaluate our method across three distinct downstream tasks: semantic classification, segmentation, and PDE-guided physics simulation. Experimental results demonstrate that our framework achieves superior task performance with fewer views compared to commonly used baselines and prior general uncertainty-reduction techniques.
Jingsen Zhu, Silvia Sellán, Alexander Terenin
Cornell University, USA · Columbia University, USA
Active 3D reconstruction relies on active view selection to maximize reconstruction fidelity under limited capture budgets. However, most existing methods rely on surrogate signals such as parameter uncertainty or geometric heuristics, but these signals are often misaligned with the ultimate goal: the fidelity of rendered predictions. We propose GO-PRE, a goal-oriented next-best-view selection framework that explicitly targets information gain in the prediction space. Specifically, we formulate the objective as maximizing the reduction of the average marginal predictive entropy over a user-specified target view manifold. GO-PRE supports interactive goal specification and yields an efficient acquisition rule that enables real-time computation of information gain. Extensive experiments across benchmarks demonstrate that GO-PRE consistently improves active reconstruction performance and provides more reliable uncertainty quantification compared to state-of-the-art methods.
Yan Song, Zhihao Li, Chenglong Li +3
College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai, China · School of Software, Shandong University, Jinan, China · School of Data Science and Engineering, East China Normal University, Shanghai, China